Asanté FriendlyNET™ GigaNIX™ 1000TA/TPC 11
Chapter 3. Macintosh Software Installation
Once the hardware has been installed and the GigaNIX Gigabit adapter is
connected to the network, it is time to install the software. Software drivers must
be properly installed for the Gigabit Ethernet adapter to function.

3.1 Installing the GigaNIX Mac OS8 or 9 Software Driver

Before you begin, make sure your system contains enough RAM for the proper
functioning of your adapter. If you need assistance, refer to Section 1.3 for the
Macintosh system requirements information.
Step 1 Begin the Installation by inserting the GigaNIX CD into the CD ROM.
Double clicking on the CD-ROM icon to open the CD.
Note: Before launching the GigaNIX installer application, make sure no other
applications are running. This ensures a smooth installation process,
and avoids possible damage to files and applications left running
during the installation.
Step 2 Launch the GigaNIX Installer application by double clicking on the
GigaNIX installer icon to begin the install process.