Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic IB6054601-00 D manual Ipathether Configuration on Suse 9.3, Sles 9, and Sles, Onboot=Yes

Models: IB6054601-00 D

1 122
Download 122 pages 48.66 Kb
Page 26
Image 26

2 – InfiniPath Cluster Administration Configuration and Startup

Q

If you are using DHCP (dynamic host configuration protocol), add the following lines to ifcfg-eth2:

#QLogic Interconnect Ethernet DEVICE=eth2

ONBOOT=yes

BOOTPROTO=dhcp

If you are using static IP addresses, use the following lines instead, substituting your own IP address for the sample one given here.The normal matching netmask is shown.

#QLogic Interconnect Ethernet DEVICE=eth2 BOOTPROTO=static

ONBOOT=YES

IPADDR=192.168.5.101 #Substitute your IP address here NETMASK="255.255.255.0"#Normal matching netmask TYPE=Ethernet

This will cause the ipath_ether Ethernet driver to be loaded and configured during system startup. To check your configuration, and make the ipath_ether Ethernet driver available immediately, use the command (as root):

# /sbin/ifup eth2

4.Check whether the Ethernet driver has been loaded with: $ lsmod grep ipath_ether

5.Verify that the driver is up with: $ ifconfig -a

2.4.6.2

ipath_ether Configuration on SUSE 9.3, SLES 9, and SLES 10

These configuration steps will cause the ipath_ether network interfaces to be automatically configured when you next reboot the system. These instructions are for the SUSE 9.3, SLES 9 and SLES 10 distributions.

Typically on servers there are two Ethernet devices present, numbered as 0 (eth0) and 1 (eth1). This example assumes we create a third device, eth2.

NOTE: When multiple InfiniPath chips are present, the configuration for eth3, eth4, and so on follow the same format as for adding eth2 in the examples below. Similarly , in step 2, add one to the unit number, so replace .../00/guid with /01/guid for the second InfiniPath interface, and so on.

2-8

IB6054601-00 D

Page 25 Page 27
Page 26
Image 26
Q-Logic IB6054601-00 D manual Ipathether Configuration on Suse 9.3, Sles 9, and Sles, Onboot=Yes
Page 25 Page 27

IB6054601-00 D specifications

The Q-Logic IB6054601-00 D is a high-performance InfiniBand adapter card designed for data centers and enterprise applications requiring robust connectivity and low-latency communication. This adapter is part of QLogic's extensive portfolio of networking solutions, catering to the needs of high-performance computing (HPC), cloud computing, and virtualization environments.

One of the standout features of the IB6054601-00 D is its capability to support data transfer rates of up to 56 Gbps. This makes it ideal for applications demanding large bandwidth and quick data processing. The adapter is optimized for RDMA (Remote Direct Memory Access) technology, which allows data to be transferred directly between the memory of different computers without involving the CPU. This reduces latency and CPU overhead, leading to enhanced overall system performance.

The architecture of the IB6054601-00 D includes support for a dual-port design, which offers increased bandwidth, redundancy, and fault tolerance. This dual-port configuration is especially advantageous for environments that require high availability and reliability, such as financial services and mission-critical applications.

The adapter utilizes advanced error detection and correction mechanisms, ensuring that data integrity is maintained during transmission. With features like adaptive routing and congestion management, the IB6054601-00 D is capable of optimizing the handling of data flows, thereby enhancing performance even under heavy loads.

In terms of compatibility, the Q-Logic IB6054601-00 D supports a wide range of operating systems and virtualization technologies, making it easy to integrate into diverse IT environments. It also includes drivers and software packages that facilitate seamless deployment and management.

In addition to high-speed connectivity, the adapter is designed with power efficiency in mind. It adheres to Energy Star regulations, helping organizations lower their operational costs while minimizing their environmental footprint.

Overall, the Q-Logic IB6054601-00 D stands out for its high throughput, low latency, and reliability. Its combination of advanced features and technologies positions it as an excellent choice for organizations looking to enhance their data center performance and maximize the efficiency of their network infrastructure. With the growing demands for faster and more efficient data transfer, solutions like the IB6054601-00 D are essential in meeting the evolving needs of modern enterprises.