Juniper Networks SSG 20 manual Using Telnet, WebUI Login Prompt

Page 30

SSG 20 Hardware Installation and Configuration Guide

Figure 14: WebUI Login Prompt

4.If you have not yet changed the default login for the admin name and password, enter netscreen at both the admin name and password prompts. (Use lowercase letters only. The login and password fields are both case-sensitive.)

Using Telnet

To establish a Telnet connection, perform the following steps:

1.Connect your workstation to the 0/2 — 0/4 port (bgroup0 interface in the Trust zone) on the device.

2.Ensure that your workstation is configured for DHCP or is statically configured with an IP address in the 192.168.1.0/24 subnet.

3.Start a Telnet client application to the IP address for the bgroup0 interface (the default IP address is 192.168.1.1). For example, enter telnet 192.168.1.1.

The Telnet application displays the login prompt.

4.If you have not yet changed the default login for the login and password, enter netscreen at both the login and password prompts. (Use lowercase letters only. The login and password fields are both case-sensitive.)

5.(Optional) By default, the console times out and terminates automatically after 10 minutes of idle time. To remove the timeout, enter set console timeout 0.

30 Accessing a Device

Image 30

Contents SSG 20 Hardware Installation and Configuration Guide Copyright Notice Table of Contents Appendix B Initial Configuration Wizard About This Guide Organization WebUI ConventionsNavigational Path and Configuration Settings CLI ConventionsObtaining Documentation and Technical Support Hardware Overview Port and Power Connectors Front Panel System Status LEDsStatus LED Descriptions Name Color Name Color Status Description Link Port DescriptionsLAN Port LEDs Name Color Status Description TX/RXMini Physical Interface Module Port Descriptions Mini PIMs for the SSGMini PIM LED States on the SSG Type Name Color Description Power Adapter Back PanelRadio Transceivers Grounding Lug Antennae Types USB PortInstalling and Connecting the Device Installing Equipment Before You BeginSSG 20 Front-mount Connecting Interface Cables to a Device Connecting the PowerConnecting a Device to a Network Connecting a Device to an Untrusted NetworkConnecting Mini PIMs to an Untrusted Network Serial AUX/Console PortsConnecting a Device to an Internal Network or a Workstation Microfilter and Splitter on Your Network ConnectionWireless Antennae Configuring the Device Accessing a Device Using a Console ConnectionUsing the WebUI Using Telnet WebUI Login PromptDefault Device Settings Default Physical Interface to Zone Bindings Port LabelDMZ Wireless and Logical Interface Bindings Interface ZoneBasic Device Configuration Root Admin Name and PasswordDate and Time Bridge Group InterfacesAdministrative Access Management ServicesDefault Route Hostname and Domain NameManagement Interface Address Backup Untrust Interface Configuration Basic Wireless ConfigurationDefault SSG 20-WLAN Configuration WPA Wireless Authentication and Encryption OptionsWPA-PSK WPA2-PSKActivate wireless changes Mini PIM Configuration ADSL2/2+ InterfaceVirtual Circuits PPPoE or PPPoA Static IP Address and Netmask Isdn Interface T1 InterfaceE1 Interface Modem Interface Basic Firewall Protections Verifying External ConnectivityResetting a Device to Factory Defaults Page Servicing the Device Required Tools and PartsReplacing a Mini-Physical Interface Module Removing a Blank Faceplate Removing a Mini PIMInstalling a Mini PIM Removing a Mini PIMUpgrading Memory Bottom of DeviceUnlocking the Memory Module 56 „ Upgrading Memory Specifications Physical ElectricalEnvironmental Tolerance EMC Emissions SafetyCertifications EMC ImmunityGND ConnectorsRJ-45 Connector Pinouts Name Description DSRDTR DB-9 Connector Pinouts Name DescriptionDCD RTSPage Initial Configuration Wizard Administrator Login Window Rapid Deployment WindowWlan Access Point Window Physical Interface WindowAdsl Interface Configuration Window ADSL2/2+ Interface WindowFields in Adsl Interface Configuration Window Description VPI/VCIT1 Interface Windows T1 Physical Layer Tab WindowFields in T1 Physical Layer Tab Window Description 70 „ Page Cisco Hdlc Option with Cisco Hdlc Tab Window E1 Interface Windows E1 Physical Layer Tab WindowFields in E1 Physical Layer Tab Window Description Isdn Interface Windows Field DescriptionFields in Isdn Physical Layer Tab Window Description SPID1SPID2 Page 92 Modem Interface Window Eth0/0 Interface Untrust Zone WindowEth0/1 Interface DMZ Zone Window Bgroup0 Interface Trust Zone Window Bgroup0 Interface WindowWireless0/0 Interface Trust Zone Window Fields in Bgroup0 Interface Window DescriptionFields in Wireless0/0 Interface Window Description Interface Summary WindowSsid Wireless Dhcp Interface Window Physical Ethernet Dhcp Interface WindowConfirmation Window Confirmation WindowIndex AdslVPI/VCI