Juniper Networks SSG 20 manual Interface Summary Window, Ssid

SSG 20 Hardware Installation and Configuration Guide

Table 27: Fields in Wireless0/0 Interface Window

Field	Description
Wlan Mode	Sets the WLAN radio mode:
	„ 5G (802.11a).
	„ 2.4G (802.11b/g).
	„ Both (802.11a/b/g).
SSID	Sets the SSID name.
Authentication and Encryption	Sets the WLAN interface authentication and encryption:
	„ Open authentication, the default, allows anyone to access
	the device. There is no encryption for this authentication
	option.
	„ WPA Pre-Shared Key authentication sets the Pre-Shared Key
	(PSK) or passphrase that must be entered when accessing a
	wireless connection. You can choose to enter a HEX or an
	ASCII value for the PSK. A HEX PSK must be a 256-bit
	(64-text character) HEX value. An ASCII passphrase must be
	8 to 63 text characters. You must select Temporal Key
	Integrity Protocol (TKIP) or Advanced Encryption Standard
	(AES) as the encryption type for this option, or select Auto to
	allow either option.
	„ WPA2 Pre-Shared Key.
	„ WPA Auto Pre-Shared Key.
Interface IP	Sets the WLAN interface IP address.
Netmask	Sets the WLAN interface netmask.

14. Interface Summary Window

After you have configured the WAN interfaces, you will see the Interface Summary window.

Figure 43: Interface Summary Window

82„