Juniper Networks SSG 20 manual Wireless Authentication and Encryption Options, Wpa-Psk, WPA2-PSK

Table 7: Wireless Authentication and Encryption Options

Authentication	Encryption
Open	Allows any wireless client to access the device
Shared-key	WEP shared-key
WPA-PSK	AES/TKIP with pre-shared key
WPA	AES/TKIP with key from RADIUS server
WPA2-PSK	802.11i compliant with a pre-shared key
WPA2	802.11i compliant with a RADIUS server
WPA-Auto-PSK	Allows WPA and WPA2 type with pre-shared key
WPA-Auto	Allows WPA and WPA2 type with RADIUS server
802.1x	WEP with key from RADIUS server

Refer to the Concepts & Examples ScreenOS Reference Guide for configuration examples, SSID attributes, and CLI commands relating to wireless security configurations.

To configure a wireless interface for basic connectivity, use the WebUI or CLI as follows:

WebUI

1. Set the WLAN country code and IP address.

Wireless > General Settings > Select the following, then click Apply:

Country code: Select your code

IP Address/Netmask: ip_add/netmask

2. Set the SSID.

Wireless > SSID > New: Enter the following, then click OK:

SSID:

Authentication:

Encryption:

Wireless Interface Binding:

3.(Optional) set the WEP key.

SSID > WEP Keys: Select the keyID, then click Apply.

4.Set the WLAN mode.

Network > Interfaces > List > Edit (wireless interface): Select Both for the WLAN mode, then click Apply.

Basic Wireless Configuration „ 39