Hypertec ISDN 10T Router manual Trouble Shooting, Clear Trap List, Detail Log Enable, Trap History

Page 64

Configura

Trouble Shooting

Under the Detail Log, the trouble shooter enables the ISDN router to send more detailed IP, PPP, and ISDN activity traps to NMS to enable trouble shooting. It should only be enabled during the trouble shooting stage. Keeping it on all time will increase the Ethernet traffic, and work load to the ISDN router and therefore is not beneficial to performance.

Clear Trap List

This click button is used to clear the traps previously stored in the trap history.

Detail Log Enable

This click button asks the Hypertec Router to send full detail traces. It is good source for trouble shooting. At system reset time, the detail log is always disabled.

Trap History

Each trap is described in date, time, type, and a brief information about the cause of the traps. Within the trap history area, up to 100 traps are stored for review with the most recent trap first.

Figure 0-18, Statistics Trace Window

ISDN Data Call Attempts

This field displays how many times the ISDN router has tried to make an ISDN data call since last reset. Note that an incoming ISDN data call does not contribute to this counter.

57

Image 64

Contents Hypertec Isdn 10T Router Introduction Contents Hypertec Isdn 10T Router Ethernet Internet/IntranetAnalog Services SecurityNetwork Management Router SoftwareAbout this Manual Hypertec Isdn 10T Router Packing ListHardware Installation GeneralInstallation Installing the Hypertec Isdn 10T Router NMS Software InstallationUninstalling NMS Installing EasyWeb if there is no installed Http serverInstalling EasyWeb if there is an installed Http server Installing EasyWebExample using the Microsoft Personal web server on Win95 Isdn OverviewInterface Type National Isdn Variants Default Setting Isdn Switch VariantsPhysical Interface Service Profile Identifiers SPIDs Service type Number of channels56K/64K Rate Adaption Isdn Permanent Nailed CircuitBridging Data Communication ServicesRouting Internet and Intranet Connection Profiles IP Address and Subnet MaskRouting Table IP Address, Un-Numbered, or NumberedDynamic IP address Assignment Unnumbered Isdn LinkIPX Address IPX Frame TypeRIP IPX SpoofingMultilink PPP F1 F1 F2 F2 PacketDial on Demand Bandwidth on DemandPacket Filtering, IP Access List Data CompressionCalling Line Identification Clid CallbackNAT Line Provisioning Service Voice PreemptionIntroduction Ordering the Isdn LineIsdn Switches and Services Supported Switch type Isdn ServiceUsing Isdn Order Codes Capability Isdn Service PackageProvisioning the Isdn Line Capability PackagesSolution Sets Solution Set Isdn ServiceNational Isdn 1 & National Isdn Switch Feature ValueMultiple Subscriber Numbering MSN More Information Terminal TypesIntroduction General NMS Menu Structure Configura Login NMS WindowsExample Sub-Menu window NMS System Menus Required Information NMS ToolbarDescription Source Required or Optional Starting NMS Logging Into NMSQuick Configuration Menu Local Router NameNetwork Address Translation Enable Dial-out AuthenticationDial-out Password Local IP MaskIsdn Switch Type Phone NumberCall-in Authentication Call-in PasswordLocal Menu Local Ethernet Sub-menuSwitch Type Channel Alarm ThresholdDevice Name IP AddressLocal Isdn Window Phone 1 Usage Phone 2 UsageData Usage Route TableARP Proxy Access ListRIP Protocol Local Dhcp Sub-menu IP Address Pool Start Address, End AddressSubnet Mask Gateway AddressDhcp Enable Data ServiceDomain Name Lease DurationRemote Router Name Internet PPP WindowUtil Ave IntervalIdle Remote Snmp Enable IP EnableInternet IP Sub-menu IP Address of Remote EthernetIP Mask of Remote Ethernet Local End IP Address of Isdn LineRemote End IP Address of Isdn Line IP Mask of Isdn LineStarting Port FTP ServerHttp Server Telnet ServerClid Calling Num12, Intranet PPP Window Encapsulation Protocol Intranet IP Menu 13, Intranet IP WindowIntranet IPX Menu 14, Intranet IPX Window Spoofing AgeIPX Route Table IPX SAP TableSnmp Menu 15, Snmp WindowTrap Enable DescriptionName LocationErrors BroadcastsDiscards Channel StatusB1 Channel Status B2 Channel StatusError Frames Channels Up TimeChannels In Use B1 UtilisationTrouble Shooting Detail Log EnableClear Trap List Trap HistoryIsdn Data Call Success PPP AttemptsPPP Success Managing the Hypertec Router from a Console20, Console Login Screen 21, Console Quick Config Screen Managing the Hypertec Router from a BrowserRouter Isdn Express Route Troubleshooting Monitor the status of the B channel LEDs Monitor the status of the D channel LEDMonitor the status of the Ethernet LEDs If your are unable to make voice call IndexIf your are unable to make a data call Index Spid SPID-1 SPID-2 Product Warranty