Configura
Starting NMS
In Windows 95/NT, NMS is started by clicking Start/Programs/Wishcom NMS.
In Windows 3.1, NMS is started by clicking the NMS icon in the NMS window.
Logging Into NMS
The Login box pops up when you start the NMS program. The login dialog box serves two purposes: It lets you enter the IP address to select a specific Hypertec ISDN 10T Router to manage, it also lets you assign the IP address to an Hypertec ISDN 10T Router by clicking the associated check box.
This convenient way of assigning an IP address to the router does not require you to enter the IP address through the console. If you assign an IP address to the Hypertec ISDN 10T Router through the login dialog box, the Hypertec Router will reset itself after receiving the IP address assignment request. The assigned IP address will be stored in the
There should be only one active Hypertec Router on the Ethernet when performing the IP address assignment through the Login dialog box. If there is more than one Hypertec Router on the LAN,
Once you have successfully assigned the IP address to the router, you should not click the “assign IP address” check box again next time you run the NMS program unless you want to change the router’s IP address.
Figure 0-3 Login Dialog Box
29