Configura
Local DHCP Sub-menu
The DHCP
IP Address Pool (Start Address, End Address)
The IP address pool as indicated by the Start Address and End Address is used by the DHCP server to release the IP addresses to the DHCP clients. The Hypertec Router supports 16 IP addresses even if user specifies a IP address pool larger than 16 IP addresses. The start address and end address are set by default having the same IP subnet as the router’s Ethernet address.
Subnet Mask
While leasing an IP address to a client, the IP Subnet Mask is among other configuration information available from DHCP server.
Gateway Address
While leasing an IP address to a client, the gateway IP address is among other configuration information available from DHCP server.
Primary DNS
While leasing an IP address to a client, the primary DNS IP address is among other configuration information available from DHCP server.
Secondary DNS
While leasing an IP address to a client, the secondary DNS IP address configuration information is also available from the Hypertec Router DHCP server.
38