Hawking Technology H2BR4 manual Pptp

Page 24

1.4 PPTP

Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP should provide all the information required in this section.

 

Figure 1.6

 

 

Parameter

Description

Obtain an IP address

The ISP requires you to obtain an IP address by DHCP automatically before connecting

 

to the PPTP server.

Use the following IP address

The ISP gives you a static IP to be used to connect to the PPTP server.

IP Address

This is the IP address that your ISP has given you to establish a PPTP connection.

Subnet Mask

Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0)

Default Gateway

Enter the IP address of the ISP Gateway

24

Image 24
Contents Page Hawking Limited Warranty Page Page Page Features Minimum Requirements Get to Know the Broadband RouterBack Panel Local Area Network LAN Front PanelSetup Diagram Configure your PC to obtain an IP address automaticallyGetting started DNS Configuration Select Disable DNS 2a Windows 95/98/Me2b Windows 2c Windows NT IP Address Select Obtain an IP address from a Dhcp server Page Status Information Chapter Functions to meet your LAN requirements Page About Quick Setup Enable Daylight SavingsTime Zone Set Time ZoneBroadband Type Cable Modem Fixed-IP xDSLPPPoE PptpExplanation on MAC addresses DNS MTU Pptp BEZEQ-ISRAEL General Settings WAN SystemSystem Settings Time ZonePassword Settings For Verification Remote ManagementWAN Dynamic IP address Static IP address5 L2TP Telstra Big PondDynamic IP Address Static IP AddressPPPoE PPP over Ethernet PptpPage MTU Telstra Big Pond WAN Policy 8 DNS Ddns Page LAN IP address IP Address PoolNAT Port Forwarding Page Virtual Server Example Virtual Server Special Applications Page Example Special Applications ExampleUPnP Protocol and Port Binding Page ALG Settings Static Routing Firewall Page Access Control Page Add PC Example Access Control URL Blocking DoS Denial of Service Intrusion Detection Features 4 DMZ Page Status Status and Information Internet Connection Device Status System Log View the operation log of the systemSecurity Log Active Dhcp Client Statistics Tools Configuration Tools Firmware Upgrade Reset How to Manually Find Your PC’s IP and MAC Addresses Type Ipconfig /all and click EnterPage TCP FTP Smtp POP3