Hawking Technology H2BR4 manual Telstra Big Pond

Idle Time Out	Note: The WAN "idle timeout" auto-disconnect function may not work due to abnormal
	activities of some network application software, computer viruses or hacker attacks from
	the Internet. For example, some software sends network packets to the Internet in the
	background, even when you are not using the Internet. This function also may not work
	with some ISPs. Please make sure this function can work properly when you use this
	function the first time, especially if your ISP charges you by time used. Due to various
	uncontrollable issues, we cannot guarantee the WAN "idle timeout" auto-disconnect
	function will always work. In order to prevent an extra fee from being charged by your
	ISP, please turn off the router when you are finished using the Internet.

Click OK when you have finished the configuration above. You have now completed the configuration for the L2TP connection. You can start using the router now. If you wish to use some of the advanced features supported by this router, see Chapters 2, 3, 4.

2.2.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the Internet. Your ISP should provide all the information required in this section. Telstra Big Pond protocol is used by ISPs in Australia.

Figure 2.8

36