Parameters | Description |
Enable DMZ | Enables/disables DMZ. |
| Note: If there is a conflict between the Virtual Server and the DMZ setting, then the |
| Virtual Server function will have priority over the DMZ function. |
WAN Port | The WAN port that the local client PC’s IP address will bind to. |
Public IP Address | The IP address of the WAN port or any other Public IP addresses given to you by your |
| ISP. The WAN port may use dynamic IP or static IP given by your ISP. If your ISP |
| gives you more than one dynamic IP address, you have to assign the session number that |
| you want to apply. |
Client PC IP Address | Input the IP address of a particular host in your LAN that will receive all the packets |
| originally going to the WAN port/Public IP address above. |
| Note: You need to give your LAN PC clients a fixed/static IP address for the DMZ |
| function to work properly. |
Add DMZ | Fill in the "WAN Port", "Public IP Address” and “Client IP Address” of the DMZ to be |
| added and then click "Add". This DMZ entry will then be added into the "DMZ Table" |
| below. If you find any errors before adding it and want to retype it again, just click |
| "Clear" and the fields will be cleared. |
Remove DMZ | If you want to remove a DMZ from the "DMZ Table", select the DMZ entries you want to |
| remove in the table and then click "Delete Selected". If you want to remove all DMZ |
| entries from the table, just click the "Delete All" button. Clicking "Reset" will clear your |
| current selections. |
You can now configure other advanced sections or start using the router (with the advanced settings in place).
66