Parameter | Description |
Enable Port Forwarding | Enable Port Forwarding |
Private IP | This is the private IP of the server behind the NAT firewall. |
| Note: You need to give your LAN PC clients a fixed/static IP address for |
| Port Forwarding to work properly. |
Type | This is the protocol type to be forwarded. You can choose to forward |
| “TCP” or “UDP” packets only or select “both” to forward both “TCP” |
| and “UDP” packets. |
Port Range | The range of ports to be forward to the private IP. |
WAN Port | Assign the WAN port that requires port forwarding. All the packets sent |
| from this WAN port with the assigned port range will be directed to the |
| assigned private IP addresses. |
Comment | The description of this setting. |
Add Port Forwarding into the table | Fill in the "Private IP", “Type”, “Port Range”, “WAN Port” and |
| "Comment" of the settings to be added and then click "Add". Then this |
| Port Forwarding setting will be added into the "Current Port Forwarding |
| Table" below. If you find any errors before adding it and want to type it |
| in again, just click "Clear" and the fields will be cleared. |
Remove Port Forwarding into the table | If you want to remove some Port Forwarding settings from the " Current |
| Port Forwarding Table", select the Port Forwarding settings you want to |
| remove in the table and then click "Delete Selected". If you want to |
| remove all Port Forwarding settings from the table, just click the "Delete |
| All" button. Clicking "Reset" will clear your current selections. |
Click Apply at the bottom of the screen to save the above configurations. You can now configure other advanced sections or start using the router (with the advanced settings in place).
45