Add PC
Parameters | Description |
Client PC Description | The description for this client PC rule. |
Client PC IP Address | Enter the IP address that you wish to apply the Access Control rule to. This is the |
| user’s IP address for which you wish to setup an Access Control rule. |
| Note: You need to give your LAN PC clients a fixed/static IP address for the |
| Access Control rule to work properly. |
Client PC Service | You can block the clients from accessing some Internet services by checking the |
| services you want to block. |
Protocol | This allows you to select UDP, TCP or both protocol types you want to block. |
Port Range | You can assign up to five port ranges. The router will block clients from |
| accessing Internet services that use these ports. |
Apply Changes | Click “Apply Changes” to save the settings. |
Reset | Click “Reset” to clear all fields. |
Click Apply Changes at the bottom of the screen to save the above configurations. You can now configure other advanced sections or start using the router (with the advanced settings in place).
60