| Figure 2.17 |
|
|
Parameters | Description |
Enable Trigger Port | Enables the Special Application function. |
Trigger Port | This is the outgoing (Outbound) range of port numbers for this particular application |
Trigger Type | Select whether the outbound port protocol is “TCP”, “UDP” or both. |
Public Port | Enter the |
| 2400, 47624) |
| Note: Individual port numbers are separated by a comma |
| (e.g. 47624, 5775, 6541 etc.). To input a port range use a “dash” to separate the two port |
| number range (e.g. |
Public Type | Select the Inbound port protocol type: “TCP”, “UDP” or both |
Comment | The description of this setting. |
49