Destination IP Range | Only packets with this assigned destination IP range will statically bind to the assigned |
| WAN port. |
Source Port Range | Only packets with this assigned source port range will statically bind to the assigned |
| WAN port. |
Destination Port Range | Only packets with this assigned destination port range will statically bind to the assigned |
| WAN port. |
Protocol | Only packets with this assigned protocol will statically bind to the assigned WAN port. |
WAN Port | The WAN port that the packets matching this rule are statically bound to. |
Add a Rule | Fill in the "Source IP Range", "Destination IP Range”, “Source Port Range”, "Destination |
| Port Range", "Protocol" or "WAN Port" of the setting to be added and then click "Add". |
| This rule of Protocol and Port Binding will then be added into the "Protocol and Port |
| Binding Table" below. If you find any errors before adding it and want to retype it again, |
| just click "Clear" and the fields will be cleared. |
Remove a Rule | If you want to remove a rule from the "Protocol and Port Binding Table", select the rules |
| you want to remove in the table and then click "Delete Selected". If you want to remove |
| all rules from the table, just click the "Delete All" button. Clicking "Reset" will clear your |
| current selections. |
Click Apply at the bottom of the screen to save the above configurations. You can now configure other advanced sections or start using the router (with the advanced settings in place).
53