Huawei Aolynk DR814, Aolynk DR811 user manual Route

Page 25

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router	4 Web-based Management

Click LAN Setup in the Main menu and choose the DHCP tab in the Main Frame to open the DHCP configuration page.

Figure 4-9DHCP setting

This page allows you to:

•Enable/disable the DHCP server.

•Assign the DHCP server address pool.

If the DHCP server is currently disabled, you may click the button to enable it.

If the DHCP server is currently enabled, you may click the button to disable it.

The DHCP server (if enabled) will use the address pool defined in this page to provide IP addresses to requesting DHCP clients. You may check the Use the default range box to assign a suitable default IP address pool on this subnet (recommended). If needed, you can change the DHCP address pool manually, but you must uncheck the Use the default range box in the meantime.

To change the DHCP address pool manually, enter the start IP address and/or end IP

address, and then click the button. For more details about IP address, refer to 6.1 IP Addresses.

Enter a DNS suffix in the Local domain name box as needed. This option is usually used for small- to moderate-sized enterprises. Common home users do not need to set it.

4.6 Route

This option allows you to create static IP routes to destination addresses via an IP interface name or a gateway address.

To access the route configuration page, follow anyone of these steps:

22

Image 25

Contents Huawei Aolynk DR811/DR814 ADSL2+Broadband Router All Rights Reserved Trademarks Table of Contents IP Addresses, Network Masks, and Subnets Product Overview IntroductionsModel Difference Front View AppearanceStatus Description Interface Quantity Connector Description FeaturesRear View Interface Quantity Parts CheckOverview Connecting Your DeviceSteps Finish Getting Started with the Web Pages Accessing the Web PagesLAN Settings button Web Page Layout Button Function Commonly Used ButtonsBehavior Testing Your SetupOption Default Setting Explanation/Instruction Default Device SettingsEnabled with Web-based Management Quick SetupOpen the WAN Connection Configuration WAN SettingWAN setting DNS Relay DNS relay LAN SettingLAN setting Dhcp Route Aolynk DR811/DR814 ADSL2+Broadband Router 12Create routes Security Interface Labeled Enabled/Disabled Aolynk DR811/DR814 ADSL2+Broadband Router DMZ Configuration 19Add a security interface Security Policy Definition Trigger24 Add trigger Aolynk DR811/DR814 ADSL2+Broadband Router 25Delete trigger Click the button to delete this trigger 11 IDSSntp 26 IDS settingZipb 27 Sntp setting28 Zipb setting Remote Access Password32 Restart Restart RouterConfiguration Backup/Restore Aolynk DR811/DR814 ADSL2+Broadband Router 37Restore configuration UpgradeStatus 39 Status 20 Log 41 Log PVC ScanSave Configure Configuring Ethernet PCs Configuring Your ComputersBefore You Begin Windows XP PCsWindows 2000 PCs Windows 95, 98 PCs Windows Me PCsWindows NT 4.0 Workstations Assigning Static Internet Information to Your PCs Connecting a Computer to the USB Port by a USB cable Configuring a PC Connected by USB PortInstalling the USB Driver 2Found new hardware New hardware installed and ready to use Configuring IP Properties on PC Connected by USB Port IP Addresses IP Addresses, Network Masks, and SubnetsStructure of an IP Address Network Classes Subnet MasksClass Field1 Field2 Field3 Field4 Aolynk DR811/DR814 ADSL2+Broadband Router Configuration Overview Service ConfigurationConnectionPureBridge PureBridgeIPoA DHCP/StaticIPPPPoE PPPoAPPPoE Troubleshooting Suggestions TroubleshootingProblem Troubleshooting Suggestion To see if the Adsl line is connected correctly Ping Diagnosing Problem Using IP UtilitiesPing Nslookup NslookupAppendix Glossary Domain Dhcp serverName DownloadHub HostInternet IntranetPacket Network Network maskPort Protocol Remote RJ-11Routing RJ-45Subnet Subnet maskWeb Web browserWeb site