Huawei Aolynk DR811 user manual Configuring a PC Connected by USB Port, Installing the USB Driver

Page 56

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router	5 Configuring Your Computers

5.2 Configuring a PC Connected by USB Port

5.2.1 Connecting a Computer to the USB Port by a USB cable

If you use the ADSL router’s USB port to connect to a PC, you must install the provided USB driver on the PC. The driver enables Ethernet-over-USB communication with the ADSL router.

5.2.2 Installing the USB Driver

Ensure that the USB function of your PC is OK.

The Microsoft Windows 98, 98 SE, ME, 2000, and XP support this driver. The following installation instruction is based on Windows XP; you may refer to it when operating on other operating systems.

1. Insert the driver CD to your CDROM.

The CD shipped with the ADSL router contains the USB drivers. Insert it into your PC’s

CDROM.

2. Plug the USB cable from the device into the USB port of the PC.

The USB cable provided has a flat connector on one end (called Type A) and a square connector on the other (Type B). Connect the flat connector to your PC and the square connector to the ADSL router.

To ADSL-	To PC
Ethernet router
Figure 5-1USB port outline

Plug the USB cable from the device into the USB port of the PC. The PC will detect the newly-attached device and display the Found New Hardware Wizard dialog box:

53

Image 56

Contents Huawei Aolynk DR811/DR814 ADSL2+Broadband Router All Rights Reserved Trademarks Table of Contents IP Addresses, Network Masks, and Subnets Model Difference IntroductionsProduct Overview Status Description AppearanceFront View Rear View FeaturesInterface Quantity Connector Description Parts Check Interface QuantitySteps Connecting Your DeviceOverview Finish Accessing the Web Pages Getting Started with the Web PagesLAN Settings button Web Page Layout Commonly Used Buttons Button FunctionTesting Your Setup BehaviorEnabled with Default Device SettingsOption Default Setting Explanation/Instruction Quick Setup Web-based ManagementWAN Setting Open the WAN Connection ConfigurationWAN setting DNS Relay LAN Setting DNS relayLAN setting Dhcp Route Aolynk DR811/DR814 ADSL2+Broadband Router 12Create routes Security Interface Labeled Enabled/Disabled Aolynk DR811/DR814 ADSL2+Broadband Router DMZ Configuration 19Add a security interface Security Policy Trigger Definition24 Add trigger Aolynk DR811/DR814 ADSL2+Broadband Router 11 IDS 25Delete trigger Click the button to delete this trigger26 IDS setting Sntp27 Sntp setting Zipb28 Zipb setting Password Remote AccessRestart Router 32 RestartConfiguration Backup/Restore Aolynk DR811/DR814 ADSL2+Broadband Router Upgrade 37Restore configurationStatus 39 Status 20 Log PVC Scan 41 LogSave Configure Configuring Your Computers Configuring Ethernet PCsBefore You Begin Windows XP PCsWindows 2000 PCs Windows Me PCs Windows 95, 98 PCsWindows NT 4.0 Workstations Assigning Static Internet Information to Your PCs Installing the USB Driver Configuring a PC Connected by USB PortConnecting a Computer to the USB Port by a USB cable 2Found new hardware New hardware installed and ready to use Configuring IP Properties on PC Connected by USB Port Structure of an IP Address IP Addresses, Network Masks, and SubnetsIP Addresses Class Field1 Field2 Field3 Field4 Subnet MasksNetwork Classes Aolynk DR811/DR814 ADSL2+Broadband Router Service Configuration Configuration OverviewPureBridge ConnectionPureBridgeDHCP/StaticIP IPoAPPPoA PPPoEPPPoE Problem Troubleshooting Suggestion TroubleshootingTroubleshooting Suggestions To see if the Adsl line is connected correctly Ping Diagnosing Problem Using IP UtilitiesPing Nslookup NslookupAppendix Glossary Dhcp server DomainName DownloadHost HubInternet IntranetNetwork Network mask PacketPort Protocol Remote RJ-11RJ-45 RoutingSubnet Subnet maskWeb site Web browserWeb