Installing Memory
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1Follow the procedures in "Before You Begin" on page 53.
2Press out the securing clip at each end of the memory module connector.
1
2
3
1 memory connector closer to | 2 | securing clips (2) | 3 | connector |
processor |
|
|
|
|
64
