Removing a DVD Drive
1Follow the procedures in "Before You Begin" on page 53.
NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors.
2Pull up on the drive release latch and slide the drive towards the back of the computer. Then, lift up to remove the drive from the computer.
1
2
1 drive release latch | 2 CD/DVD drive |
3Disconnect the power and DVD drive cables from the back of the drive.
Installing a DVD Drive
1Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are installing an IDE drive, configure the drive for the cable select setting.
2If you are installing a new drive:
a Press the two snaps on the top of the
b Remove the three shoulder screws from the
82