Dell 3100C owner manual Drive Interface Connectors, Power Cable Connector, Serial ATA Connector

Models: 3100C

1 134
Download 134 pages 22.76 Kb
Page 72
Image 72

Drive Interface Connectors

Most interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one connector matches a tab or a filled-in hole on the other connector. Keyed connectors ensure that the pin- 1 wire in the cable (indicated by the colored stripe along one edge of the IDE cable—serial ATA cables do not use a colored stripe) goes to the pin-1 end of the connector. The pin-1 end of a connector on a board or a card is usually indicated by a silk-screened “1” printed directly on the board or card.

NOTICE: When you connect an IDE interface cable, do not place the colored stripe away from pin 1 of the connector. Reversing the cable prevents the drive from operating and could damage the controller, the drive, or both.

Serial ATA Connector

1

2

1

interface cable

2

interface connector

Power Cable Connector

To connect a drive using the power cable, locate the power input connector on the system board.

1

2

1 power cable

2

power input connector

72

Removing and Installing Parts

Page 72
Image 72
Dell 3100C owner manual Drive Interface Connectors, Power Cable Connector, Serial ATA Connector