User Manual |
|
Aolynk DR811/DR814 ADSL2+Broadband Router | 5 Configuring Your Computers |
5.1.4Windows Me PCs
1)In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2)
3)In the Network and
4)If Internet Protocol (TCP/IP) is not displayed as an installed component, click Add….
5)In the Select Network Component Type dialog box, select Protocol, and then click Add….
6)Select Microsoft in the Manufacturers box.
7)Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You may be prompted to install files from your Windows Me installation CD or other media. Follow the instructions to install the files.
8)If prompted, click OK to restart your computer with the new settings. Next, configure the PCs to accept IP information assigned by the ADSL router:
9)In the Control Panel,
10)In Network and
11)In the Network Properties dialog box, select TCP/IP, and then click Properties.
12)In the TCP/IP Settings dialog box, click the radio button labeled Server assigned IP address. Also click the radio button labeled Server assigned name server address.
13)Click OK twice to confirm and save your changes, and then close the Control Panel.
5.1.5Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1)In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2)
3)The Network dialog box is displayed with a list of currently installed network components. If the list includes TCP/IP, then the protocol has already been enabled. Skip to step 9.
4)If TCP/IP is not displayed as an installed component, click Add…The Select Network Component Type dialog box appears.
5)Select Protocol, and then click Add…. The Select Network Protocol dialog box appears.
50