Refer to the figure on the following page. Select the Device you want to set up and Click “Next”.
Reachable | Status | Action |
NO | The Network HD’s | Changes the network |
| network settings are not | settings and creates two |
| compatible with your LAN. | shortcuts to access and set |
|
| up the Network HD |
YES | The Network HD’s | Creates two shortcuts to |
| network settings are | access and set up the |
| compatible with your LAN | Network HD |
|
|
|
Hard Drive(s) Found
The Setup Wizard should automatically assign to the device an IP address that is consistent with your existing network settings.
23