GarrettCom Magnum 6KQ manual SFPs, Gigabit 1000Mbps port modules

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

6KQ-2GSFPCU

1 Port@ 10/100/1000Mbps, 1 Port at 1000Mb SFP

2

4

1

3

1 LINK 2 10/100/1000

3 ACTIVITY 4 FULL/HALF

5.2.11SFPs, Gigabit (1000Mbps) port modules

The Magnum 6KQ offers a Gigabit option with multiple choices of copper

10/100/1000Mbps or Gigabit SFP Fiber modules for the modular slot. While up to two Gigabit modules (maxm.) can be configured in the modular slot D only.

The 6KQ Modules provide a GBIC opening for insertion of industry-standard SFPs to provide Gigabit (Gb) media flexibility. SFP fiber Transceivers are available with both multi-mode (550m) at 850nm and single-mode at 1330nm (10, 25, 40, 70)km fiber options, and for Gigabit copper as well, with new models appearing often.

The 1000Mb Gigabit SFP fiber-port modules on the Magnum 6KQ are normally set (factory default) to operate at AUTO mode for best fiber distance and performance. Only two Gigabit ports can be configured on a Mangum 6KQ managed switch in slot D.

There are three LEDs provided on each SFP Gigabit port module. The SFP Gigabit fiber has LEDs that indicate LK (Link status) and ACT (receiving activity) when lit and F/H (on for Full and OFF for half duplex) for that port.

The copper Gigabit port supports 10/100/1000Mb speeds. The three LED’s show the speed the connection has achieved. It is set as AUTO by default. All other LEDs are the same as the SFP fiber.

www . GarrettCom . com

42