GarrettCom manual Locating Magnum 6KQ Switches

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

Example 3. In another application in an industrial environment, a 12 port Nebs compliant, -24VDC managed switch is required to meet the fiber and copper connections to cover the wider area of video CCTV. The switch must be SNMP enabled and managed to easily monitor the whole setup.

The Magnum managed field switch easily qualifies for this requirement with the various features and modularity it has. Loaded with MNS-6K management software, the field switch provides a very effective and economical solution for the video -vignette environment.

The security features (e.g. port-security, VLANs, SNMPv3, secure telnet, etc.) also boost the Magnum managed switches to provide a very effective and reliable solution. The modularity feature to support both copper and fiber at either 10/100/1000Mb speeds easily meets the various speeds of legacy and future broadband requirements.

In a fast growing secure video environment, the 6KQ is a reliable and secure solution. The modular design of the Magnum 6KQs, provide a wide range of copper/fiber options to meet requirements. The Gigabit uplink for storage or broadband uplink allows the telecom user a very effective solution to store their sensitive data securely.

Fig. 2.4c: Magnum 6KQs deployed in a video security CCTV application for monitoring and securing the premises

3.0Installation

Before installing the equipment, it is necessary to take the following precautions:

1.) If the equipment is mounted in an enclosed or multiple rack assembly, the steady-state long-term environmental temperature around the equipment must be less than or equal to 600C.

2.) If the equipment is mounted in an enclosed or multiple rack assembly, adequate airflow must be maintained for proper and safe operation.

3.) If the equipment is mounted in an enclosed or multiple rack system, placement of the equipment must not overload or load unevenly the rack system.

4.) If the equipment is mounted in an enclosed or multiple rack assembly, verify the equipment’s power requirements to prevent overloading of the building/s electrical circuits.

5.) If the equipment is mounted in an enclosed or multiple rack assembly verify that the equipment has a reliable and uncompromised earthing path.

This section describes installation of the Magnum 6KQ Switches, as well as connection of the various Ethernet media types.

3.1Locating Magnum 6KQ Switches

For vertical panel mounting and wall mounting, see Section 3.3.1.

For vertical DIN-Rail mounting, see Section 3.3.

www . GarrettCom . com

19