GarrettCom 6K25e manual Per the IEEE802.3af PoE

Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07)

ordering information Sec.1.2. for all the various PI6K PoE modules option.

The LEDs on 6KP8-RJ45- PoE module are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to a 803.af compliant PD device on that port. When non-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data traffic is not affected by PoE.

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED that is marked as LINK/ACT, as shown in the diagram.

2.2.5New PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-

port

The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports, except they have capability of providing power on each port to power up the PD devices,

6KP8-45RJ

per the IEEE802.3af PoE

standard. The Power Pass-

8 Port@ 10/100Mb Copper ports

through PoE modules are

2

totally dependent upon the

powerful -48VDC input

1

3

5

1

10/10

LK/AC

power supply to support

POE

more RJ-45 (10/100)

F/ H

2

4

6

10/10

LK/AC

ports. Each port requires

4

3

atleast 15watts to power

up the PoE PD devices.

F/H

POE

1

LK/ACT

2

10/10

Maxm. one PoE modules

LINK

can be configured in the

3

PoE

4

FULL/HALF

A, B or C slot of any 6K s

with -48vdc power input.

The PoE modules are also

available with mix –n-match with fiber modules. Please check the ordering information Sec.1.2 for all the various P6K PoE modules option.

The LEDs on 6KP8-RJ45- PoE module are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to a 803.af compliant PD device on that port. When non-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data traffic is not affected by PoE.

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED that is marked as LINK/ACT, as shown in the diagram.

2.2.6Six-Port “4 + 2”Combo Modules, 4@ 10/100 RJ-45 and 2@100Mb fiber 4@RJ-45 + 2@ 100Mb ST or SC

The combo six-port modules are combinations of copper and fiber media, available as

four 10/100 switched RJ-45 copper ports and two 100Mb switched multi-mode fiber ST, SC or single mode SC or Long Reach SC ports. For ports numbering, ports 1,3,5,7 are copper, ports 2 and 6 are fiber, ports 4 and 8 are not present.

The four RJ-45 ports operate just like the 8-port copper module with auto-cross

www . GarrettCom . com

12