GarrettCom 6K25e manual „ Managed switching for high performance Ethernet LANs

Page 23

Magnum 6K25e Gigabit Fiber Switch

Installation and User Guide (10/07)

2.3Features and Benefits

„Managed switching for high performance Ethernet LANs

Magnum 6K25e Switches provide non-blocking (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included. They are typically used in LAN traffic centers with eight Gigabit ports or 16 to 24 100Mb ports and one or 2 Gigabit ports for backbone connections, where managed network services are desired.

„Switching services includes 802.1p QoS packet prioritization

The Magnum 6K25e switching hardware supports QoS, giving packet processing priority to priority tagged packets according to the IEEE 802.1p standard. For port- and application-specific priorities, the QoS software may be configured by the user.

„Features Fiber-Built-In

Magnum 6K25e Managed Fiber Switches are designed to naturally include fiber ports, and support mixes of multi-mode and single-mode; 10 Mb, 100Mb and 1000Mb speed; full-and half-duplex; classic Small Form Factor (SFF) and GBIC fiber connectors. RJ-45 10/100 ports can also be configured in the mix of port types.

„Modular design for port flexibility, in a 1U space-saving rack-mount package

The 1U Magnum 6K25e chassis has 4 slots for port configurations. Family of 4, 6 or 8 port modules allow the user to select the desired mix of port types & speeds. The port modules are normally factory installed and tested, but may be changed in the field.

„Rack-mounting may be standard or “reverse”, 19 inch or ETSI or 23” Telco

The standard rack mounting provides Ethernet ports and status LEDs in front, service connections (power input and management console) in the rear. “Reverse” rack mounting provides status LEDs in front and all cabling connections in the rear. Standard 19’ rack mount brackets are included, with ETSI and 23” Telco optional.

„Standard AC power input, -48VDC or 24VDC or 125VDC input is optional

Standard AC power input is IEC plug, auto-ranging for worldwide use. For special applications, models with –48VDC or 24VDC or 125VDC are available. Dual Source DC input can also be selected and configured on the DC power input models.

„Heavy-duty design for Industrial Ethernet and extended temperature operation.

Fiber ports take more power than copper ports, but the Magnum 6K25e design provides for this with heavy-duty components. The ambient temperature can be up to 55°C.

„NEBS and ETSI tested and certified

The 6K25e has been tested and certified for NEBS and ETSI. Request test reports.

„MNS-6K licensed Network Management Software included, S-Ring optional

Release 3.7 (Fall ’07) includes SNMP Switch Management with secure access control, RMON, CLI, Port Security; Port Mirroring; Port Settings Control; Telnet, TFTP, FTP support, Spanning Tree Protocol, RSTP, Web-based, multi-level QoS, Port- and tag- based VLANs, GVRP, IGMP Snooping, SNMPc GUI support; Event Log; SNTP

www . GarrettCom . com

17

Image 23
Contents Gigabit Fiber Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsRevisions 6K25E Managed Fiber Switch Port ModulesMagnum Line Maximum 10 Mbps Ethernet Segment Lengths Technical SpecificationsPerformance Network Standards and Compliance, hardwarePower Supply Internal Fiber Multi-mode connector types supportedFiber Single-mode connector types Management Console connectorAgency Approvals Alarm Contact OptionalNebs Testing and Certification Nebs certified Per-port MDI or Mdix on RJ-45Ordering Information 6K PoE Modules with 48VDC Pass-Through For Gigabit module configuration options6K PoE Modules with 48VDC Power Inside Introduction Inspecting the Package and Product Product Description Magnum 6K25e Managed Fiber SwitchWww . GarrettCom . com Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Magnum 6K25e and 6K25eR chassisEight-Port Copper Module, 6K8-RJ45 The 6K25e-Series’s8-port 100Mb fiber eightPort modules for the Magnum New PoEPower Inside, model PI6KP8-45RJ MDIX, 10/100Mb 8-port Per the IEEE802.3af PoE Four-Port 10 Mb mm Fiber ST Modules Gigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSWeb-browser, at ftp//ftp.garrettcom.com Managed Network Software MNS-6K for Magnum 6K25e-Series„ Nebs and Etsi tested and certified „ Managed switching for high performance Ethernet LANs„ Features Fiber-Built-In „ SFP Gigabit module being supported on Slot D „ RJ-45 ports are MDI/MDIX supportedApplications 6K 25e Locating Magnum 6K25e Switches InstallationCopper Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock Ieee Standard Media Type Max. Distance Port Module FiberMedia Ieee Standard Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Media Ieee Standard Gigabit SFP Small Form-factor Pluggable Optical Transceivers Side View Duplex LC connector Front viewSFP-SX SFP-LX10 SFP-LX25 SFP-ZX40 SFP-ZX70 Table-Top or Shelf Mounting1 Mountings for Magnum 6K25e units rack-mounted in a frame Rack-mounting for 19 Retma racks, regular Magnum 6K25esRack-mounting, Reverse version of the Magnum 6K25es Powering the Magnum Managed Fiber SwitchWww . GarrettCom . com Remove Chassis Cover 6K25e Port Module 6KPM InstallationPreparation for Installing and Removing 6KPMs 1a Removing Chassis Cover Installing 6KPM Cards in the Magnum 6K25e Uplink 2f Securely latching up 6KPM Cards into a Magnum 6K25e Removing 6KPM Cards Remove 6KPM Card Connecting the Console Terminal to Magnum 6K25e ManagementConsole DB-9 Port 1 RS-232 DB-9 Console Com port Serial port pin assignments Pin Signal DescriptionSwitching Functionality DB-9 Console port connectorACT Status LEDsUp-link MDI-MDIX on RJ-45 port modules, for port 1 only PWRAuto-CrossMDIX and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x standard F10ST Introduction Magnum 6K25e Managed Fiber Switch Port Modules 6KPM Module Description 1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Lock Module 1c 6KP4@10Mb @100Mb Multi-mode FX-ST twist Transceivers all in one module. This Mode 100Mbps fiber opticMode SC-type connectors. It Provides an advantage Fiber functions in one Module of the 6K25e SwitchWww . GarrettCom . com Link Port@ 100Mbps Multi-Mode Fiber portActivity FULL/HALF Form Factor 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Option in one 6K-unit Fig. the top 8-RJ45 PoE LEDs Summary10/100 GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector Before Calling for Assistance 14 6KM-BLNKReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundB3.0 Applications for DC Powered Switches Appendix B Internal DC Power Supply OptionsSpecifications for Magnum 6K25E SWITCHES, DC Power Magnum 6K25es. see figure at right B4.0 InstallationB5.0 Operation Appendix C Internal DC Dual-Source Power OptionB4.1 UL Requirements for DC-powered units B7.0 TroubleshootingC5.0 Installation C4.0 Features and Benefits of the DUAL-SOURCE DesignExample Magnum 6K25eR-24VDC or Magnum 6K25eR-125VDC C5.1 UL RequirementsC6.0 Ordering Information Example Magnum 6K25eR-48VDCOperation C7.0