GarrettCom 6K25e manual 1 RS-232 DB-9 Console Com port Serial port pin assignments

Page 43

Magnum 6K25e Gigabit Fiber Switch

Installation and User Guide (10/07)

3.6.1RS-232 (DB-9) Console Com port (Serial port) pin assignments.

Pin 1

Pin 5

DB-9 (Console port connector)

Pin

Signal

Description

 

 

 

1

CD

Carrier detect (not used)

2

RXD

Receive Data (input)

3

TXD

Transmit Data (output)

4

open

not used

5

GND

Signal Ground

6-9

open

not used

The above provided information enables a managed station( a PC or Console terminal) to connect directly to the switch using a straight through cable.(Note: The Null-Modem (DB-9) cable is optional and can be order from the factory, along with the unit

NOTE for Power Substations: In support of the IEEE 1613 Class 2 standard, GCI advises that, for substation applications, the serial RJ-45console ports are intended for temporary connectivity to other equipment such as PCs. Since the console port connection is temporary, it is excluded from IEEE 1613 packet- loss testing per the 1613 standard-defined test procedure.

4.0OPERATION

This chapter describes the functions and operation of the Magnum 6K25e Switch.

4.1Switching Functionality

A Magnum 6K25e provides switched connectivity at Ethernet wire-speed

among all of its ports. The Magnum 6K25e supports10/100Mbs for copper media and 10 or 100Mb separate traffic domains for fiber ports to maximize bandwidth utilization and network performance. All ports can communicate to all other ports in a Magnum 6K25e, but local traffic on a port will not consume any of the bandwidth on any other port.

www . GarrettCom . com

37

Image 43
Contents Gigabit Fiber Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsRevisions 6K25E Managed Fiber Switch Port ModulesMagnum Line Maximum 10 Mbps Ethernet Segment Lengths Technical SpecificationsPerformance Network Standards and Compliance, hardwarePower Supply Internal Fiber Multi-mode connector types supportedFiber Single-mode connector types Management Console connectorAgency Approvals Alarm Contact OptionalNebs Testing and Certification Nebs certified Per-port MDI or Mdix on RJ-45Ordering Information 6K PoE Modules with 48VDC Pass-Through For Gigabit module configuration options6K PoE Modules with 48VDC Power Inside Introduction Inspecting the Package and Product Product Description Magnum 6K25e Managed Fiber SwitchWww . GarrettCom . com Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiber Magnum 6K25e and 6K25eR chassisPort modules for the Magnum 100Mb fiber eightEight-Port Copper Module, 6K8-RJ45 The 6K25e-Series’s8-port New PoEPower Inside, model PI6KP8-45RJ MDIX, 10/100Mb 8-port Per the IEEE802.3af PoE Four-Port 10 Mb mm Fiber ST Modules Gigabit 1000Mbps port modules Frame Buffering and Flow Control Packet Prioritization, 802.1p QOSWeb-browser, at ftp//ftp.garrettcom.com Managed Network Software MNS-6K for Magnum 6K25e-Series„ Features Fiber-Built-In „ Managed switching for high performance Ethernet LANs„ Nebs and Etsi tested and certified „ SFP Gigabit module being supported on Slot D „ RJ-45 ports are MDI/MDIX supportedApplications 6K 25e Locating Magnum 6K25e Switches InstallationCopper Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock Ieee Standard Media Type Max. Distance Port Module FiberConnecting Single-Mode Fiber Optic Connecting Fiber Optic SC-type, Snap-InMedia Ieee Standard Media Ieee Standard Gigabit SFP Small Form-factor Pluggable Optical Transceivers Side View Duplex LC connector Front viewSFP-SX SFP-LX10 SFP-LX25 SFP-ZX40 SFP-ZX70 Table-Top or Shelf Mounting1 Mountings for Magnum 6K25e units rack-mounted in a frame Rack-mounting for 19 Retma racks, regular Magnum 6K25esRack-mounting, Reverse version of the Magnum 6K25es Powering the Magnum Managed Fiber SwitchWww . GarrettCom . com Preparation for Installing and Removing 6KPMs 6K25e Port Module 6KPM InstallationRemove Chassis Cover 1a Removing Chassis Cover Installing 6KPM Cards in the Magnum 6K25e Uplink 2f Securely latching up 6KPM Cards into a Magnum 6K25e Removing 6KPM Cards Console DB-9 Port Connecting the Console Terminal to Magnum 6K25e ManagementRemove 6KPM Card 1 RS-232 DB-9 Console Com port Serial port pin assignments Pin Signal DescriptionSwitching Functionality DB-9 Console port connectorACT Status LEDsUp-link MDI-MDIX on RJ-45 port modules, for port 1 only PWRAuto-CrossMDIX and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x standard F10ST Introduction Magnum 6K25e Managed Fiber Switch Port Modules 6KPM Module Description 1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module @10Mb @100Mb Multi-mode FX-ST twist 1c 6KP4Lock Module Transceivers all in one module. This Mode 100Mbps fiber opticMode SC-type connectors. It Provides an advantage Fiber functions in one Module of the 6K25e SwitchWww . GarrettCom . com Activity FULL/HALF Port@ 100Mbps Multi-Mode Fiber portLink Form Factor 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Option in one 6K-unit Fig. the top 8-RJ45 PoE LEDs Summary10/100 GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector Before Calling for Assistance 14 6KM-BLNKReturn Material Authorization RMA Procedure When Calling for AssistanceShipping and Packaging Information No Problem FoundSpecifications for Magnum 6K25E SWITCHES, DC Power Appendix B Internal DC Power Supply OptionsB3.0 Applications for DC Powered Switches Magnum 6K25es. see figure at right B4.0 InstallationB5.0 Operation Appendix C Internal DC Dual-Source Power OptionB4.1 UL Requirements for DC-powered units B7.0 TroubleshootingC5.0 Installation C4.0 Features and Benefits of the DUAL-SOURCE DesignExample Magnum 6K25eR-24VDC or Magnum 6K25eR-125VDC C5.1 UL RequirementsC6.0 Ordering Information Example Magnum 6K25eR-48VDCOperation C7.0