GarrettCom 6K25e manual When Calling for Assistance, Return Material Authorization RMA Procedure

Page 62

Magnum 6K25e Gigabit Fiber Switch

Installation and User Guide (10/07)

4.If the problem is isolated to a network device other than the Magnum 6K25e Switch product, it is recommended that the problem device be replaced with a known good device. Verify whether or not the problem is corrected. If not, go to Step 5 below. If the problem is corrected, the Magnum 6K25e Switch and its associated cables are functioning properly.

5.If the problem continues after completing Step 4 above, contact your supplier of the Magnum 6K25e Switch unit or if unknown, contact GarrettCom, Inc.by

fax, phone or email (support@garrettcom.com) for assistance.

6.2When Calling for Assistance

Please be prepared to provide the following information.

1.A complete description of the problem, including the following points:

a.The nature and duration of the problem;

b.Situations when the problem occurs;

c.The components involved in the problem;

d.Any particular application that, when used, appears to create the problem;

2.An accurate list of GarrettCom product model(s) involved, with serial number(s). Include the date(s) that you purchased the products from your supplier.

3.It is useful to include other network equipment models and related hardware, including personal computers, workstations, terminals and printers; plus, the various network media types being used.

4.A record of changes that have been made to your network configuration prior to the occurrence of the problem. Any changes to system administration procedures should all be noted in this record.

6.3Return Material Authorization (RMA) Procedure

All returns for repair must be accompanied by a Return Material Authorization (RMA) number. To obtain an RMA number, please use this URL - https://rma.garrettcom.com/rma/rma_request_noaccount.php to fill out the form. Please have the following information readily available:

Name and phone number of your contact person.

Name of your company / institution

Your shipping address

Product name

Serial Number (or Invoice Number)

Packing List Number (or Sales Order Number)

Date of installation

Failure symptoms, including a full description of the problem.

www . GarrettCom . com

56

Image 62
Contents Gigabit Fiber Switch Trademarks Contacting GarrettCom, Inc Canadian EmissionTable of Contents Introduction6K25E Managed Fiber Switch Port Modules RevisionsMagnum Line Network Standards and Compliance, hardware Technical SpecificationsPerformance Maximum 10 Mbps Ethernet Segment LengthsManagement Console connector Fiber Multi-mode connector types supportedFiber Single-mode connector types Power Supply InternalPer-port MDI or Mdix on RJ-45 Alarm Contact OptionalNebs Testing and Certification Nebs certified Agency ApprovalsOrdering Information For Gigabit module configuration options 6K PoE Modules with 48VDC Pass-Through6K PoE Modules with 48VDC Power Inside Product Description Magnum 6K25e Managed Fiber Switch Introduction Inspecting the Package and ProductWww . GarrettCom . com Magnum 6K25e and 6K25eR chassis Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb fiberEight-Port Copper Module, 6K8-RJ45 The 6K25e-Series’s8-port 100Mb fiber eightPort modules for the Magnum New PoEPower Inside, model PI6KP8-45RJ MDIX, 10/100Mb 8-port Per the IEEE802.3af PoE Four-Port 10 Mb mm Fiber ST Modules Gigabit 1000Mbps port modules Packet Prioritization, 802.1p QOS Frame Buffering and Flow ControlManaged Network Software MNS-6K for Magnum 6K25e-Series Web-browser, at ftp//ftp.garrettcom.com„ Nebs and Etsi tested and certified „ Managed switching for high performance Ethernet LANs„ Features Fiber-Built-In „ RJ-45 ports are MDI/MDIX supported „ SFP Gigabit module being supported on Slot DApplications 6K 25e Installation Locating Magnum 6K25e SwitchesIeee Standard Media Type Max. Distance Port Module Fiber Connecting Ethernet MediaConnecting Fiber Optic ST-type, twist-lock CopperMedia Ieee Standard Connecting Fiber Optic SC-type, Snap-InConnecting Single-Mode Fiber Optic Media Ieee Standard Side View Duplex LC connector Front view Gigabit SFP Small Form-factor Pluggable Optical TransceiversTable-Top or Shelf Mounting SFP-SX SFP-LX10 SFP-LX25 SFP-ZX40 SFP-ZX70Rack-mounting for 19 Retma racks, regular Magnum 6K25es 1 Mountings for Magnum 6K25e units rack-mounted in a framePowering the Magnum Managed Fiber Switch Rack-mounting, Reverse version of the Magnum 6K25esWww . GarrettCom . com Remove Chassis Cover 6K25e Port Module 6KPM InstallationPreparation for Installing and Removing 6KPMs 1a Removing Chassis Cover Installing 6KPM Cards in the Magnum 6K25e Uplink 2f Securely latching up 6KPM Cards into a Magnum 6K25e Removing 6KPM Cards Remove 6KPM Card Connecting the Console Terminal to Magnum 6K25e ManagementConsole DB-9 Port DB-9 Console port connector Pin Signal DescriptionSwitching Functionality 1 RS-232 DB-9 Console Com port Serial port pin assignmentsPWR Status LEDsUp-link MDI-MDIX on RJ-45 port modules, for port 1 only ACTAuto-CrossMDIX and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x standard F10ST Introduction Magnum 6K25e Managed Fiber Switch Port Modules 6KPM Module Description 1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Lock Module 1c 6KP4@10Mb @100Mb Multi-mode FX-ST twist Fiber functions in one Module of the 6K25e Switch Mode 100Mbps fiber opticMode SC-type connectors. It Provides an advantage Transceivers all in one module. ThisWww . GarrettCom . com Link Port@ 100Mbps Multi-Mode Fiber portActivity FULL/HALF Form Factor 9 6KP8-RJ45 Twisted Pair, 10/100Mb 8-Port Option in one 6K-unit PoE LEDs Summary Fig. the top 8-RJ4510/100 GBIC-SXSC Gigabit fiber1000Mb, multi-mode SC Connector 14 6KM-BLNK Before Calling for AssistanceWhen Calling for Assistance Return Material Authorization RMA ProcedureNo Problem Found Shipping and Packaging InformationB3.0 Applications for DC Powered Switches Appendix B Internal DC Power Supply OptionsSpecifications for Magnum 6K25E SWITCHES, DC Power B4.0 Installation Magnum 6K25es. see figure at rightB7.0 Troubleshooting Appendix C Internal DC Dual-Source Power OptionB4.1 UL Requirements for DC-powered units B5.0 OperationC4.0 Features and Benefits of the DUAL-SOURCE Design C5.0 InstallationExample Magnum 6K25eR-48VDC C5.1 UL RequirementsC6.0 Ordering Information Example Magnum 6K25eR-24VDC or Magnum 6K25eR-125VDCC7.0 Operation