Eizo L461 manual Controls & Connectors, Front, Rear

Page 10

1-3. Controls & Connectors

Front

	(1)	ScreenManager™
	(2)	AUTO Adjustment button
	(3)	Control Buttons
(1)	(4)	Enter Button

(5)Power Switch

(6)Power Indicator*1

Indicated color	Monitor’s status
Green	Power -on
Yellow	Power save mode
FlashingYellow	Power save mode
(2 times for each)	for digital
Slowly flashing Yellow	Power is off

(2)(3)(4)(5)(6)

Rear

(7) Power Connector

(8) Security Lock Slot*2

(9) DVI-I Input Connector

(10) 4 Holes for Mounting an Arm-Stand*3

(11) Stand (Detatchable)*3

(10)

(11)

(7)(8) (9)

*1 Regarding the power indicator for the “Off Timer”, see page 17.

*2 Allows for connection of a security cable. This lock supports Kensington’s MicroSaver security system. For further information, please consult:

Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA 800-650-4242, x3348

Intl: 650-572-2700, x3348 / Fax: 650-572-9675

http://www.kensington.com

*3 The L461 can be used with an optional arm stand by removing the original stand (see page 27).

10 1. INTRODUCTION

Image 10

Contents English Safety Symbols Table of Contents ´ Refer all servicing to qualified service personnel Precautions´ Do not dismantle the cabinet or modify the unit ´ Set the unit in an appropriate location Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ The equipment must be connected to a grounded main outlet´ Use the correct voltage ´ Handle the power cord with care´ Do not touch a damaged LCD panel directly with bare hands ´ Periodically clean the area around the plug ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Unplug the unit before cleaning itSuggestions for Maximizing Comfort LCD PanelPackage Contents FeaturesIntroduction Front Controls & ConnectorsRear Analog Input Before connectingCable Connection Digital InputAnalog Input Connecting the signal cableDigital Input Equipment must be connected to a grounded main Outlet How to use the ScreenManager ScreenManagerScreenManager Adjustments and Settings Main menu Sub menu ReferenceUseful Functions Adjustment LockEizo Logo Disappearing function Procedure Off TimerOff timer system Adjustment Screen AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Color Adjustment Before the Color adjustmentTo change the saturation Use the Saturation adjustment Power-save Setup Power saving systemSetup Procedure Attaching AN ARM Stand28 5. Attaching AN ARM Stand Troubleshooting Problems Points to check with possible solutions30 6.TROUBLESHOOTING Change after installing Auto adjustmentButton does not operate Auto adjustment Fingerprints remain onCleaning CabinetSpecifications Vesa DDC 2BDimensions Default SettingsGlossary Color Temperature TemperatureGain Adjustment AfterimageRange Adjustment PhaseResolution Index 17,35Memo Appendix / Anhang / Annexe Pin Assignment Pin-Belegung Affectation des BrochesIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix Congratulations Why do we have environmentally labelled computers?What does labelling involve? Mercury Environmental requirements Flame retardantsCadmium CFCs freonsWarland Drive, Cypress, CA We, the Responsible PartyPhone 562 431