Eizo L461 manual Cable Connection, Before connecting, Analog Input, Digital Input

Page 11

2. CABLE CONNECTION

2-1. Before connecting

Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below.

Analog Input

Resolution	Frequency	Remarks
640 x 480	~ 85 Hz	VGA, VESA
640 x 480	66.67 Hz	Apple Macintosh
720 x 400	70 Hz	VGA Text
800 x 600	~ 85 Hz	VESA
832 x 624	75 Hz	Apple Macintosh
1024 x 768	~ 85 Hz	VESA
1152 x 864	75 Hz	VESA
1152 x 870	75 Hz	Apple Macintosh
1280 x 960	75 Hz	Apple Macintosh
1280 x 1024	~ 75 Hz	VESA

•About Plug & Play of the monitor

When your computer and display support VESA DDC, the suitable resolution

and the refresh rate are set by just plugging your display into the computer without any manual settings. When your computer system supports Plug & Play, the Display Information File is not required except for installing the Color Profile.

Digital Input

Only the following resolutions with frequency can be displayed on this model.

Resolution	Frequency	Remarks
640 x 480	60 Hz	VGA
720 x 400	70 Hz	VGA Text
800 x 600	60 Hz	VESA
1024 x 768	60 Hz	VESA
1280 x 960	60 Hz	VESA
1280 x 1024	60 Hz	VESA

ENGLISH

2. CABLE CONNECTION 11

Image 11

Contents English Safety Symbols Table of Contents ´ Do not dismantle the cabinet or modify the unit Precautions´ Refer all servicing to qualified service personnel ´ The equipment must be connected to a grounded main outlet Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Do not touch a damaged LCD panel directly with bare hands ´ Handle the power cord with care´ Use the correct voltage ´ Unplug the unit before cleaning it ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Periodically clean the area around the plugLCD Panel Suggestions for Maximizing ComfortIntroduction FeaturesPackage Contents Rear Controls & ConnectorsFront Digital Input Before connectingCable Connection Analog InputDigital Input Connecting the signal cableAnalog Input Equipment must be connected to a grounded main Outlet ScreenManager How to use the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsEizo Logo Disappearing function Adjustment LockUseful Functions Off timer system Off TimerProcedure Screen Adjustment AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Before the Color adjustment Color AdjustmentTo change the saturation Use the Saturation adjustment Power saving system Power-save SetupAttaching AN ARM Stand Setup Procedure28 5. Attaching AN ARM Stand Problems Points to check with possible solutions Troubleshooting30 6.TROUBLESHOOTING Fingerprints remain on Auto adjustmentButton does not operate Auto adjustment Change after installingCabinet CleaningVesa DDC 2B SpecificationsDefault Settings DimensionsAfterimage Color Temperature TemperatureGain Adjustment GlossaryResolution PhaseRange Adjustment 17,35 IndexMemo Pin Assignment Pin-Belegung Affectation des Broches Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix What does labelling involve? Why do we have environmentally labelled computers?Congratulations CFCs freons Environmental requirements Flame retardantsCadmium MercuryPhone 562 431 We, the Responsible PartyWarland Drive, Cypress, CA