Eizo L461 manual English

Page 23

2. To be clear-cut the letters or lines of the enlarged screen.

Æ Switch the “Smoothing” setting.

Select “Smoothing” in the screen menu and switch the setting to “Off” by using the left button.

•“Smoothing” is disabled in the following cases.

*1280 x 1024 of resolution

*“Enlarged” mode in “Screen Size” setting with the 1280 of the horizontal resolution (i.e. 1280 x 960)

*“Normal” mode in the “Screen Size” setting

3.To set the brightness of the black area surrounding the image.

Æ Set the “Border Intensity”

In the “Normal” mode, the outer area (border) is usually black.

Select “Border Intensity” in the others menu and adjust by using the right and left buttons.

Border

ENGLISH

4. ADJUSTMENT 23

Image 23

Contents English Safety Symbols Table of Contents ´ Do not dismantle the cabinet or modify the unit Precautions´ Refer all servicing to qualified service personnel ´ The equipment must be connected to a grounded main outlet Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Do not touch a damaged LCD panel directly with bare hands ´ Handle the power cord with care´ Use the correct voltage ´ Unplug the unit before cleaning it ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Periodically clean the area around the plugLCD Panel Suggestions for Maximizing ComfortIntroduction FeaturesPackage Contents Rear Controls & ConnectorsFront Digital Input Before connectingCable Connection Analog InputDigital Input Connecting the signal cableAnalog Input Equipment must be connected to a grounded main Outlet ScreenManager How to use the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsEizo Logo Disappearing function Adjustment LockUseful Functions Off timer system Off TimerProcedure Screen Adjustment AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Before the Color adjustment Color AdjustmentTo change the saturation Use the Saturation adjustment Power saving system Power-save SetupAttaching AN ARM Stand Setup Procedure28 5. Attaching AN ARM Stand Problems Points to check with possible solutions Troubleshooting30 6.TROUBLESHOOTING Fingerprints remain on Auto adjustmentButton does not operate Auto adjustment Change after installingCabinet CleaningVesa DDC 2B SpecificationsDefault Settings DimensionsAfterimage Color Temperature TemperatureGain Adjustment GlossaryResolution PhaseRange Adjustment 17,35 IndexMemo Pin Assignment Pin-Belegung Affectation des Broches Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix What does labelling involve? Why do we have environmentally labelled computers?Congratulations CFCs freons Environmental requirements Flame retardantsCadmium MercuryPhone 562 431 We, the Responsible PartyWarland Drive, Cypress, CA