Eizo L461 manual Attaching AN ARM Stand, Setup Procedure

Page 27

5. ATTACHING AN ARM STAND

The L461 can be used with an arm stand by removing the tilt stand and attaching the arm stand to the terminal.

´Use an arm stand that satisfies the followings.

• When using the L461 with an arm stand, the arm stand must be VESA approved :

*Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad.

*Use an arm stand that is able to support an object weighting 8.0 kg.

´TÜ V/GS approved arm stand.

´Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.

´Use an arm stand remaining that position where it is manually moved.

´Use an arm stand with the ability to tilt the monitor forward and backward.

´Please connect cables after attaching an arm stand.

M4 x 16 mm

75 mm

75 mm

ENGLISH

Setup Procedure

1. Lay the L461 down as shown below. Do not scratch the panel.

Soft Cloth or

Cushion

2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10 mm).

5. ATTACHING AN ARM STAND 27

Image 27

Contents English Safety Symbols Table of Contents Precautions ´ Refer all servicing to qualified service personnel´ Do not dismantle the cabinet or modify the unit ´ The equipment must be connected to a grounded main outlet Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Handle the power cord with care ´ Use the correct voltage´ Do not touch a damaged LCD panel directly with bare hands ´ Unplug the unit before cleaning it ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Periodically clean the area around the plugLCD Panel Suggestions for Maximizing ComfortFeatures Package ContentsIntroduction Controls & Connectors FrontRear Digital Input Before connectingCable Connection Analog InputConnecting the signal cable Analog InputDigital Input Equipment must be connected to a grounded main Outlet ScreenManager How to use the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsAdjustment Lock Useful FunctionsEizo Logo Disappearing function Off Timer ProcedureOff timer system Screen Adjustment AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Before the Color adjustment Color AdjustmentTo change the saturation Use the Saturation adjustment Power saving system Power-save SetupAttaching AN ARM Stand Setup Procedure28 5. Attaching AN ARM Stand Problems Points to check with possible solutions Troubleshooting30 6.TROUBLESHOOTING Fingerprints remain on Auto adjustmentButton does not operate Auto adjustment Change after installingCabinet CleaningVesa DDC 2B SpecificationsDefault Settings DimensionsAfterimage Color Temperature TemperatureGain Adjustment GlossaryPhase Range AdjustmentResolution 17,35 IndexMemo Pin Assignment Pin-Belegung Affectation des Broches Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix Why do we have environmentally labelled computers? CongratulationsWhat does labelling involve? CFCs freons Environmental requirements Flame retardantsCadmium MercuryWe, the Responsible Party Warland Drive, Cypress, CAPhone 562 431