Eizo L461 manual Horizontal flickering, blurring or bars appear on the screen

Page 19

Use the “Phase” p.36) adjustment.

3. Adjust by using “Screen” menu in the ScreenManager.

(1)Vertical bars appear on the screen.

Æ Use the “Clock” p.35) adjustment

Select the “Clock” and eliminate the vertical bars by using the right and left of the control buttons. Do not continuously press the control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point.

If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment as follows.

•When adjusting the “Clock,” the horizontal screen size will also change.

(2) Horizontal flickering, blurring or bars appear on the screen.

Æ

Select the “Phase” and eliminate the horizontal flickering, blurring or bars by using the right and left buttons.

•Horizontal bars may not completely disappear from the screen depending on the PC.

ENGLISH

4. ADJUSTMENT 19

Image 19

Contents English Safety Symbols Table of Contents ´ Refer all servicing to qualified service personnel Precautions´ Do not dismantle the cabinet or modify the unit ´ The equipment must be connected to a grounded main outlet Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Use the correct voltage ´ Handle the power cord with care´ Do not touch a damaged LCD panel directly with bare hands ´ Unplug the unit before cleaning it ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Periodically clean the area around the plugLCD Panel Suggestions for Maximizing ComfortPackage Contents FeaturesIntroduction Front Controls & ConnectorsRear Digital Input Before connectingCable Connection Analog InputAnalog Input Connecting the signal cableDigital Input Equipment must be connected to a grounded main Outlet ScreenManager How to use the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsUseful Functions Adjustment LockEizo Logo Disappearing function Procedure Off TimerOff timer system Screen Adjustment AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Before the Color adjustment Color AdjustmentTo change the saturation Use the Saturation adjustment Power saving system Power-save SetupAttaching AN ARM Stand Setup Procedure28 5. Attaching AN ARM Stand Problems Points to check with possible solutions Troubleshooting30 6.TROUBLESHOOTING Fingerprints remain on Auto adjustmentButton does not operate Auto adjustment Change after installingCabinet CleaningVesa DDC 2B SpecificationsDefault Settings DimensionsAfterimage Color Temperature TemperatureGain Adjustment GlossaryRange Adjustment PhaseResolution 17,35 IndexMemo Pin Assignment Pin-Belegung Affectation des Broches Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix Congratulations Why do we have environmentally labelled computers?What does labelling involve? CFCs freons Environmental requirements Flame retardantsCadmium MercuryWarland Drive, Cypress, CA We, the Responsible PartyPhone 562 431