Eizo L461 manual ScreenManager Adjustments and Settings, Main menu Sub menu Reference

Page 15

3-2. ScreenManager Adjustments and Settings.

The following table shows all the ScreenManager’s adjustment and setting menus.

“*” indicates adjustments of analog input only and “**” indicates digital input only.

Main menu	Sub menu			Reference
Screen	Clock*
	Phase*
	Position*
	Resolution*
	Smoothing
	Contrast/Brightness
Color-	Range Adjustment*
Management	Standard Mode		Temperature
	Custom Mode		Temperature	4. ADJUSTMENT(p.18)
			Saturation	4. ADJUSTMENT(p.18)
			Saturation
			Hue
			Gain
			Save
PowerManager	DVI DMPM**
	VESA DPMS*
Others	Screen Size
	Border Intensity
	Off Timer			Set the monitor’s off timer to
				on or off. (p.17)
	Menu Position			Adjust the menu position.
	Menu Off Timer			Set the menu displaying time.
	Translucent			Set the transparency of the
				white background for the menu.
	Reset			Return to the factory default
				settings. (p.34)
Information	Information			Review the ScreenManager’s
				settings, model name, Serial
				Number and usage time*1.
Language	English, German, French, Spanish,			Select the ScreenManager’s
	Italian, Swedish and Japanese			language.

*1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.

ENGLISH

3. ScreenManager 15

Image 15

Contents English Safety Symbols Table of Contents Precautions ´ Refer all servicing to qualified service personnel´ Do not dismantle the cabinet or modify the unit ´ The equipment must be connected to a grounded main outlet Keep small objects or liquids away from the unit´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Handle the power cord with care ´ Use the correct voltage´ Do not touch a damaged LCD panel directly with bare hands ´ Unplug the unit before cleaning it ´ Handle with care when carrying the unit´ Use an easily accessible power outlet ´ Periodically clean the area around the plugLCD Panel Suggestions for Maximizing ComfortFeatures Package ContentsIntroduction Controls & Connectors FrontRear Digital Input Before connectingCable Connection Analog InputConnecting the signal cable Analog InputDigital Input Equipment must be connected to a grounded main Outlet ScreenManager How to use the ScreenManagerMain menu Sub menu Reference ScreenManager Adjustments and SettingsAdjustment Lock Useful FunctionsEizo Logo Disappearing function Off Timer ProcedureOff timer system Screen Adjustment AdjustmentHorizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Displaying the low resolutions English Before the Color adjustment Color AdjustmentTo change the saturation Use the Saturation adjustment Power saving system Power-save SetupAttaching AN ARM Stand Setup Procedure28 5. Attaching AN ARM Stand Problems Points to check with possible solutions Troubleshooting30 6.TROUBLESHOOTING Fingerprints remain on Auto adjustmentButton does not operate Auto adjustment Change after installingCabinet CleaningVesa DDC 2B SpecificationsDefault Settings DimensionsAfterimage Color Temperature TemperatureGain Adjustment GlossaryPhase Range AdjustmentResolution 17,35 IndexMemo Pin Assignment Pin-Belegung Affectation des Broches Appendix / Anhang / AnnexeIi Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Iv Appendix Why do we have environmentally labelled computers? CongratulationsWhat does labelling involve? CFCs freons Environmental requirements Flame retardantsCadmium MercuryWe, the Responsible Party Warland Drive, Cypress, CAPhone 562 431