Fortinet FortiGate-5000 Lists and describes the FortiGate-5005FA2 board LEDs, Act, Link, Status

Front panel LEDs and connectors FortiGate-5005FA2 security system

•2 USB connectors.

•Mounting hardware.

•LED status indicators.

The FortiGate-5005FA2 board comes supplied with fiber and copper SFP transceivers. You can order the SFP transceivers in any combination. Before you can connect any FortiGate-5005FA2 front panel interfaces, you must insert the SFP transceivers into the FortiGate-5005FA2 front panel cage slots.

Front panel LEDs and connectors

From the FortiGate-5005FA2 font panel you can view the status of the front panel LEDs to verify that the board is functioning normally. You also connect the FortiGate-5005FA2 board to your network through the front panel ethernet connectors. The front panel also includes the RJ-45 console port for connecting to the FortiOS CLI and two USB ports. The USB ports can be used with a Fortinet USB key. For information about using the FortiUSB key, see the FortiGate-5000 Series Firmware and FortiUSB Guide.

LEDs

Table 10 lists and describes the FortiGate-5005FA2 board LEDs.

Table 10: FortiGate-5005FA2 board LEDs

LED		State	Description
Fabric	ACT 2	Amber	Network activity at backplane fabric interface 2.
	LINK 2	Green	Backplane fabric interface 2 is connected at 1000 Mbps.
	ACT 1	Amber	Network activity at backplane fabric interface 1.
	LINK 1	Green	Backplane fabric interface 1 is connected at 1000 Mbps.
Base	ACT 2	Amber	Network activity at backplane base interface 2 (backplane2).
	LINK 2	Green	Backplane base interface 2 (backplane2) is connected at
			1000 Mbps.
	ACT 1	Amber	Network activity at backplane base interface 1 (backplane1).
	LINK 1	Green	Backplane base interface 1 (backplane1) is connected at
			1000 Mbps.
OOS		Off	Normal operation.
(Out of
		Red	A fault condition exists and the FortiGate-5005FA2 blade is
Service)
			out of service (OOS). This LED may also flash very briefly
			during normal startup.
ACC		Off or	The ACC LED flashes green when the FortiGate-5005FA2
		Flashing	board accesses the FortiOS flash disk. The FortiOS flash
		green	disk stores the current FortiOS firmware build and
			configuration files. The system accesses the flash disk when
			starting up, during a firmware upgrade, or when an
			administrator is using the CLI or GUI to change the FortiOS
			configuration. Under normal operating conditions this LED
			flashes occasionally, but is mostly off.
STATUS		Amber	The FortiGate-5005FA2 board is powered on.

	FortiGate-5000 Series Introduction
42	01-30000-83466-20090108