|
|
|
Front panel LEDs and connectors |
Table 17: Base channel interfaces and network activity LEDs
Interface | Description |
Name |
|
|
|
B1 and B2 | Front panel gigabit base channel interfaces B1 and B2. |
| Use these interfaces to connect your network to the base channel, to |
| connect base channel 1 to base channel 2, or to connect a base channel |
| on one chassis to a base channel on another chassis. |
|
|
BASE 10G | Front panel |
| Use this interface to connect a |
| |
| this interface is still available if you need to connect the base channel to |
| a |
|
|
Fabric channel interfaces
Table 18 lists and describes the
Table 18: Fabric channel interfaces
Interface Name | Description | ||
|
| ||
Front Panel | CLI* | ||
| |||
|
|
| |
2/1 |
| Interface between fabric channel 1 and fabric channel 2. | |
|
| If there are two | |
|
| chassis this interface can be used to communicate between | |
|
| them. In some configurations you may have to disable this | |
|
| communication. | |
3 to 13 | Fabric backplane slots 3 to 13. | ||
|
| The 3 to 13 fabric network activity LEDs are lit if there are | |
|
| FortiGate boards in chassis slots 3 to 13. | |
14/F8 |
| Front panel interface 14/F8. | |
|
| Fabric backplane slot 14 and front panel interface 14/F8 | |
|
| share the same | |
|
| the front panel interface 14/F8 is enabled and fabric | |
|
| backplane slot 14 is disabled. You can change this setting | |
|
| using a switch on the | |
F1 to F7 | f1 to f7 | Front panel | |
|
| Use these interfaces to connect your network to the fabric | |
|
| channel, to connect fabric channel 1 to fabric channel 2, or to | |
|
| connect a fabric channel on one chassis to a fabric channel | |
|
| on another chassis. |
* You can configure settings for
The fabric network activity LEDs show links and network activity for the interfaces and connections listed in Table 19.
Figure 23: FortiSwitch-5003A fabric network activity LEDs
| |
57 |