|
|
|
Front panel LEDs and connectors |
Table 21:
LED | State | Description |
|
|
|
EXT FLT | Off | Normal operation. |
|
|
|
| Yellow | Cannot establish a link to a configured interface or another |
|
| connection problem external to the |
|
| This LED may indicate issues that do not affect normal |
|
| operation. |
|
|
|
INT FLT | Off | Normal operation. |
|
|
|
| Yellow | Failure of internal tests. Indicates a hardware or software |
|
| problem with the |
|
|
|
Hot Swap | Blue | Indicates the |
|
| swapped. During a hot swap, the LED is on. The LED turns off |
|
| when the |
|
|
|
Reset | Press and | hold Reset for three seconds to restart the |
switch | board. |
|
|
|
|
About the ZRE network activity LEDs
The ZRE network activity LEDs show links and network activity for the interfaces and connections listed in Table 22.
Figure 28: FortiSwitch-5003 ZRE network activity LEDs
15 | 13 | 11 | 9 | 7 | 5 | 3 | 1 |
|
|
|
|
|
|
| ZRE |
14 | 12 | 10 | 8 | 6 | 4 | 2 | 0 |
Table 22: ZRE network activity LEDs
ZRE network Interface or connection activity LED
0ZRE0 front panel interface.
1ZRE1 front panel interface.
2ZRE2 front panel interface.
3 to 14 | Base backplane connection to |
| slots 3 to 14. |
15Base backplane link. Indicates that the
| |
63 |