Falcon SG2KRM-2TU, SG3KRM-1TU Optional Slide Mounting KIT Sgrmkit, Slide Mounting Details

OPTIONAL SLIDE MOUNTING KIT (SGRMKIT)

An slide mounting kit option is available from Falcon Electric. The part number for the kit is SGRMKIT and may be installed on any rackmount UPS and battery bank referenced in this manual. As all 2-3kVA models consist of seperate UPS and battery bank modules, two slide mounting kits are required , one for each module. All 1kVA UPS models will only require one slide kit.

Slide Installation Instructions

NOTE:	Only use the referenced lenght screws when mouning the slides to the
	sides of the UPS and battery module or UPS damage may result.

1. Install the slides per the following diagram.

Slide Mounting Details

1.	Slide, General Devices #CLB-203-16	Qty. 2
2.	Slide Mounting Bracket (Short)	Qty. 2
3.	SLide Mounting Bracket (Long)	Qty. 2
4.	Screws, 8-32 x 3/16” Phillips Pan Head	Qty. 8	(DO NOT USE LONGER SCREWS)

8