About this Guide
This guide provides an overview, installation and troubleshooting instructions, and specifications for the Enterasys SecureStack C2RPS‐POE power supply, which can provide a redundant power source to a SecureStack standalone POE switch.
Using This Guide
Read through this guide completely to familiarize yourself with its contents and gain an understanding of the features and capabilities of the C2RPS‐POE power supply. A general working knowledge of data communications networks is helpful when setting up a C2RPS‐POE power supply.
Structure of This Guide
This preface provides an overview of this guide and the SecureStack C2 manual set for PoE‐compliant devices, and explains the symbols used throughout this manual.
Chapter 1, Introduction, discusses the features and capabilities of the C2RPS‐POE power supply. This chapter also provides the instructions for obtaining help from Enterasys Networks, if needed.
Chapter 2, Installation, provides instructions to install a C2RPS‐POE power supply into a standard 19‐inch rack. This involves installing the C2RPS‐POE power supply and one 48 Vdc interconnecting power cable, and AC power cord. Troubleshooting is also covered in this chapter.
Appendix A, Specifications, provides the specifications for the C2RPS‐POE power supply, Redundant Power Supply connector pin‐out description, C2RPS‐POE Cable, and Compliance Standards.
SecureStack C2 Installation Guide xi