Enterasys Networks manual C2RPS-POE Redundant Power Supply Output Connector, Environmental

Page 32

C2RPS-POE Redundant Power Supply Output Connector

Table A-1 C2RPS-POE Specifications (continued)

Item	Specification

Physical

Dimensions	4.45 H x 44.5 W x 16.5 D (cm)
	1.75 H x 17.5 W x 6.5 D (in.)
Net Weight (unit only)	3.47 kg (7.63 lb)
Gross Weight (1 unit and packaging)	4.95 kg (10.89 lb)

MTBF	589,644 Hours at 25°C (77°F)

Environmental

Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-30°C to 73°C (-22°F to 164°F)

Operating Relative Humidity	10% to 90%

C2RPS-POE Redundant Power Supply Output Connector

For pin location and function, refer to Figure A‐1 and Table A‐2, respectively.

Note: The following information is for troubleshooting purposes only. For proper operation, do not use any other cable except the C2RPS-POE Cable. This cable is specially designed for this application and meets all necessary Regulatory and Safety standards. The use of non-approved cables will void your warranty.

Figure A-1 C2RPS-POE Redundant Power Supply Connector Pin Locations

148

71

A-2 Specifications

Image 32

Contents SecureStack C2 PoE Redundant Power Supply Page Page Regulatory Compliance Information Electromagnetic Compatibility EMC Declaration of Conformity Enterasys Networks, Inc Firmware License Agreement Page Vii Viii Contents Tables Structure of This Guide Using This GuideAbout this Guide Using the SecureStack C2 Manual Set Conventions Used in This Guide Following conventions are used in this guideConventions Used in This Guide Xiv About this Guide Introduction For information about Refer toC2RPS-POE Status LED Power Classifications and DeploymentC2RPS-POE Overview Example of a C2RPS-POE Power Configuration Getting Help Support@enterasys.comInstallation Required ToolsUnpacking the C2RPS-POE Installing the C2RPS-POE on a Flat SurfaceContents of N-POE Chassis Carton Quantity Installing the Rubber Feet Guidelines for Installation Guidelines for Rackmount Installation Rack Mounting the C2RPS-POEAttaching Brackets and Installing in Rack Color State Recommended Action Connecting C2RPS-POE Cable and AC Power CordC2RPS-POE Status LED Indications and Recommended Actions C2RPS-POE Cable C2RPS-POE Cable and AC Power Cord Connections Connecting C2RPS-POE Cable and AC Power Cord Installation Table A-1 C2RPS-POE Specifications Electrical SpecificationsC2RPS-POE Specifications Environmental C2RPS-POE Redundant Power Supply Output ConnectorTable A-1 C2RPS-POE Specifications Physical Compliance Standards Table A-3 Compliance StandardsCompliance Standards Specifications