Enterasys Networks C2RPS-POE manual Installing the Rubber Feet

Page 23

Installing the C2RPS-POE on a Flat Surface

Installing the Rubber Feet

To install the rubber feet, refer to Figure 2‐1 and proceed as follows:

1.Place the C2RPS‐POE on its back on a sturdy flat surface to gain access to the bottom of the chassis.

2.Remove the four rubber feet from their plastic bag in the shipping box.

3.Locate the four marked locations on the bottom four corners of the C2RPS‐POE.

Figure 2-1 C2RPS-POE Bottom, Rubber Feet Placement

Á

À

Â

Â

Â

Â

1 Bottom of C2RPS-POE

3 Rubber feet with adhesive backing (4)

2Locations to install the rubber feet (4 locations)

4.Remove the protective strip from the back of one rubber foot and position it on a marked location and press firmly into place. Repeat this procedure to install the remaining three rubber feet.

5.After installing the rubber feet, return the C2RPS‐POE to its upright position.

6.To install the C2RPS‐POE on a flat surface, proceed to Installing the C2RPS‐POE on a Flat Surface” on page 2‐2. For a rackmount installation, proceed to Rack Mounting the C2RPS‐POE” on page 2‐5.

SecureStack C2 Installation Guide 2-3

Image 23
Contents SecureStack C2 PoE Redundant Power Supply Page Page Regulatory Compliance Information Electromagnetic Compatibility EMC Declaration of Conformity Enterasys Networks, Inc Firmware License Agreement Page Vii Viii Contents Tables Structure of This Guide Using This GuideAbout this Guide Using the SecureStack C2 Manual Set Following conventions are used in this guide Conventions Used in This GuideConventions Used in This Guide Xiv About this Guide For information about Refer to IntroductionC2RPS-POE Status LED Power Classifications and DeploymentC2RPS-POE Overview Example of a C2RPS-POE Power Configuration Support@enterasys.com Getting HelpRequired Tools InstallationUnpacking the C2RPS-POE Installing the C2RPS-POE on a Flat SurfaceContents of N-POE Chassis Carton Quantity Installing the Rubber Feet Guidelines for Installation Rack Mounting the C2RPS-POE Guidelines for Rackmount InstallationAttaching Brackets and Installing in Rack Color State Recommended Action Connecting C2RPS-POE Cable and AC Power CordC2RPS-POE Status LED Indications and Recommended Actions C2RPS-POE Cable C2RPS-POE Cable and AC Power Cord Connections Connecting C2RPS-POE Cable and AC Power Cord Installation Table A-1 C2RPS-POE Specifications Electrical SpecificationsC2RPS-POE Specifications Environmental C2RPS-POE Redundant Power Supply Output ConnectorTable A-1 C2RPS-POE Specifications Physical Table A-3 Compliance Standards Compliance StandardsCompliance Standards Specifications