Enterasys Networks C2RPS-CHAS2 manual Table A-2 C2RPS-PSM Specifications, Electrical, Physical

Page 32

C2RPS-PSM Specifications

C2RPS-PSM Specifications

C2RPS-PSM Specifications

Refer to Table A‐2 for the input/output port specifications.

Table A-2 C2RPS-PSM Specifications

Item	Specification

Electrical

AC Input Frequency Range	47–63 Hz
AC Input Voltage Range	85–264 Vac
Output Voltage	12 Vdc
Output Current	1.0 A min., 8.5 A or 13.0 A max.
Maximum Output Power	102 W or 156 W continuous

Physical

Dimensions	19.6 H x 5.2 W x 25.7 D (cm)
	7.7 H x 2.04 W x 10.1 D (in.)
Net Weight (Unit Only)	1.75 kg (3.85 lb)
Gross Weight (Packaged Unit)	3.20 kg (7.04 lb)

MTBF	300,000 Hours

C2RPS-PSM Redundant Power Supply Output Connector

For pin location and function, refer to Figure A‐1 and Table A‐3, respectively.

Note: The following information is for troubleshooting purposes only. For proper operation, do not use any other cable except the C2RPS-PSM Cable. This cable is specially designed for this application and meets all necessary regulatory and safety standards. The use of non-approved cables will void your warranty.

Figure A-1 C2RPS-PSM Redundant Power Supply Connector Pin Locations

148

71

A-2 Specifications

Image 32

Contents C2RPS-CHAS2 SecureStack C2 Redundant Power Supply ChassisInstallation Guide Page Enterasys Networks, Inc 50 Minuteman Road Andover, MA Regulatory Compliance Information Product SafetyFederal Communications Commission FCC Notice Industry Canada NoticeElectromagnetic Compatibility EMC Compatibilidad Electromágnetica EMCElektro- magnetische Kompatibilität EMC VCCI NoticeDeclaration of Conformity Enterasys Networks, Inc Firmware License Agreement BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCTCAREFULLY READ THIS LICENSE AGREEMENT You and Enterasys agree as follows3. APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and 9. OWNERSHIP. This is a license agreement and not an agreement for sale. You acknowledge and agree that the Program constitutes trade secrets and/or copyrighted material of Enterasys and/or its suppliers. You agree to implement reasonable security measures to protect such trade secrets and copyrighted material. All right, title and interest in and to the Program shall remain with Enterasys and/or its suppliers. All rights not specifically granted to You shall be reserved to Enterasys viii Contents Chapter 2 InstallationAppendix A Specifications About This GuideTables Contents of C2RPS-CHAS2 CartonContents of C2RPS-PSM Carton C2RPS-CHAS2 SpecificationsWho Should Use This Guide How to Use This GuideAbout This Guide Related Documents Refer toConventions Used in This Guide The following conventions are used in this guidexiv About This Guide Introduction RPS OverviewFor information about Refer to pageC2RPS-CHAS2 Chassis Figure 1-1 SecureStack C2RPS-CHAS2 front view without PSMFigure 1-2 SecureStack C2RPS-CHAS2 front view with two PSMs Figure 1-3 SecureStack C2RPS-CHAS2 rear view with two PSMsFigure 1-5 C2RPS-PSM rear view C2RPS-PSM Power Supply ModuleFigure 1-4 C2RPS-PSM front view RPS Deployment Strategies Figure 1-6 RPS Supporting Two SecureStack SwitchesGetting Help 1-6 Introduction Required Tools InstallationUnpacking Chassis and Power Supply Modules Installing C2RPS-PSMs Table 2-1 Contents of C2RPS-CHAS2 CartonTable 2-2 Contents of C2RPS-PSM Carton QuantityReplacing an Installed C2RPS-PSM Figure 2-1 C2RPS-PSM InstallationInstalling C2RPS-CHAS2 into the Rack Guidelines for Rackmount InstallationRack Mounting the Chassis Figure 2-2 Fastening the C2RPS-CHAS2 to the RackFigure 2-3 C2RPS-PSM Cable Connecting the PSM Cables and AC Power CordsFigure 2-4 Power Connectors on C2RPS-PSM rear view Figure 2-5 C2RPS-PSM Cable and AC Power Cord Connections This completes the installation2-8 Installation Specifications C2RPS-CHAS2 Chassis SpecificationsTable A-1 C2RPS-CHAS2 Specifications SpecificationC2RPS-PSM Specifications C2RPS-PSM Redundant Power Supply Output ConnectorTable A-2 C2RPS-PSM Specifications Figure A-1 C2RPS-PSM Redundant Power Supply Connector Pin LocationsCompliance Standards Table A-3 C2RPS-PSM Redundant Power Supply Connector Pin FunctionsPin Number FunctionA-4 Specifications