Enterasys Networks C2RPS-CHAS2 manual Related Documents, Refer to

Related Documents

This preface provides an overview of this guide and the SecureStack C2 manual set, and a brief summary of each chapter, and the conventions used throughout this guide. To locate information in this guide, refer to the following table:

For...	Refer to...
The features and capabilities of the C2RPS-CHAS2	Chapter 1, Introduction
chassis and optional power supply modules. This
chapter also provides the instructions for obtaining help
from Enterasys Networks, if needed.
Instructions to install an RPS into a standard 19-inch	Chapter 2, Installation
rack. This involves installing the C2RPS-CHAS2 chassis,
one or two PSMs, PSM interconnecting cables, and AC
power cords.
Specifications for the C2RPS-CHAS2 chassis, PSM,	Appendix A, Specifications
PSM cable, Redundant Power Supply connector pinout
descriptions, and Compliance Standards.

Related Documents

Other manuals have been developed for the SecureStack C2 non‐PoE switch devices that can be connected to the RPS for power redundancy.

Caution: The RPS does not support PoE-compliant C2 switches. Do not try to connect the power cable from this RPS to any C2 switch with a “P” suffix in the model name, such as C2xxxxx-xxP. Otherwise, damage to the device may result.

Precaución: El RPS no es compatible con switches SecureStack C2 con PoE. No intente conectar el cable de corriente del RPS a ningún switch SecureStack C2 que tenga el sufijo “P” en el nombre del modelo, tal como C2xxxxx-xxP. De lo contrario, el dispositivo puede dañarse.

The SecureStack C2 switch manuals explain how to install the switch device, connect network cable segments to the SecureStack C2 switch device, and configure the switch device using the command line interface commands described in the SecureStack C2 Configuraton Guide.

Note: Connection of the RPS system does not require reconfiguration of the connected

Ethernet Switch.

Each manual is written for qualified personnel responsible for installing the switch device and also have a general working knowledge of data communications networks and their physical layer components.

xii About This Guide