Enterasys Networks C2RPS-CHAS2 About This Guide, Who Should Use This Guide, How to Use This Guide

About This Guide

This guide provides an overview, installation and troubleshooting instructions, and specifications for the Enterasys Networks™ SecureStack C2 redundant power supply chassis (C2RPS‐CHAS2), power supply module (C2RPS‐PSM), DC power cables (C2RPS‐PSM Cable), and AC power cords.

Note: In this document, the following terms are used:

• RPS refers to a complete redundant power system, which includes a C2RPS-CHAS2 chassis and optional power supply modules.

•Chassis refers to the C2RPS-CHAS2 chassis.

•PSM refers to the C2RPS-PSM power supply module.

•PSM cable refers to the C2RPS-PSM Cable (12 Vdc power cable).

Who Should Use This Guide

This guide is intended for a network administrator responsible for installing and setting up the stackable switch.

Electrical Hazard: Only qualified personnel should perform installation procedures.

Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.

Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.

How to Use This Guide

Read through this guide completely to familiarize yourself with its contents and gain an understanding of the features and capabilities of the RPS components. A general working knowledge of data communications networks is helpful when setting up an RPS (C2RPS‐CHAS2 chassis with optional power supply modules).

SecureStack C2 Installation Guide xi