EnGenius Technologies ENH500 user manual

Page 19

3.In the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.

4.In the properties dialog box, click Use the following IP address: to configure your

computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH500, and the default gateway which is the ENH500’s IP address, 192.168.1.1. Note: the subnet mask must match that of the ENH500 and the IP address must be on that subnet.

5.Click the OK button to save your changes and close the dialog box.

6.Click the OK button again to save your changes.

Image 19

Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary Before you start About This DocumentProduct Overview FeaturesDifficult-to-wire environments Ability to access real-time informationTraining and educational facilities Wireless extensions of Ethernet networksWired LAN backup Frequently altered environmentsBenefits System Requirement Package ContentsHardware Overview LED Understanding the ENH500 LEDsPre-installation Guidelines InstallationInstalling the ENH500 This completes the installation procedure Wireless Network Modes Access Point ModeAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Microsoft Windows Configuring Your Computer for TCP/IPPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Click the Network Connections icon Configuring Apple Mac OSLogging into the ENH500 Username and Password Save / Load StatusMain System Log Wireless Client ListDhcp Client Table Connection StatusSystem Switching the Operation Mode Wireless Settings Wireless ConfigurationExtension Channel Wireless ModeChannel HT Mode Accept / CancelStation Separation Wireless SecuritySave / Cancel Suppressed SsidPrefer Bssid Site SurveyWDS Client Refresh ProfileWireless mode supports 802.11a/n mixed modes. It is Mode MAC AddressFilled in if an AP in the Site Survey is selected Profile 1 WEP Wireless Security SettingsWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Aggregation Wireless TrafficShaping Add Wireless MAC FilterACL Mode MAC Address FilterWDS Link Settings IP Settings LAN SetupSpanning Tree Settings WAN Settings Router SettingsStatic IP Domain Name Internet ConnectionType Account NameUse These DNS Servers Dhcp Dynamic IPInternet Connection Type Get Automatically FromSecondary DNS servers manually Specify the Maximum Transmit Unit size. EnGenius recommends PPPoE Point-to-Point Protocol over EthernetThat it remains in Auto From ISP Connect on DemandKeep Alive Get AutomaticallyPptp Point-to-Point Tunneling Protocol Username Pptp ServerLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Hosting DMZDMZ Address Administration Management SettingsManagement Vlan Save / Apply / CancelPort Snmp Settings Firmware Upgrade Backup/Restore SettingsTime Settings Log Server IP Address Save/Apply / Cancel10.7 Log SyslogDiagnostics Access Point Network Configuration ExamplesProperties Select Operation Mode to Client Bridge from SystemWDS Bridge Address Automatically Select Operation Mode to Client Router from SystemChange your Local Area Network setting to Obtain an IP Internet Service Provider on the WAN SettingsTo Factory Default in the Management Appendix a TroubleshootingQuestion Answer Contacting Technical Support Channel Tx Avg. Power Optimal dBm Appendix B SpecificationsRx Sensitivity Optimal dBm Environment & Mechanical Appendix C Glossary Access PointESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Federal Communication Commission Interference Statement Appendix D Statements of ConformityIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish