EnGenius Technologies ENH500 user manual Pptp Server, Username

Page 59

	Internet Connection	Select PPTP to begin configuration of the PPTP connection.
	Type	Select PPTP to begin configuration of the PPTP connection.
	Type
	MTU	Specify the Maximum Transmit Unit size. EnGenius recommends
		that it remains in Auto.
	IP Address	Specify WAN port IP address.
	IP Subnet Mask	Specify WAN IP Subnet Mask.
	Gateway IP Address	Specify WAN Gateway IP address.

	PPTP Server	Specify PPTP Server IP address.

	Username	Specify the Username that is given by your ISP.
	Password	Specify the Password that is given by your ISP.
	Connect on Demand	Select the Radio button to specify the maximum idle time. The
		Internet will disconnect when it reaches the maximum idle time;
		however, it will automatically connect when a client tries to access
		the network.
	Keep Alive	Select the Radio button to keep internet connection always on.
		Specify the redial period once the internet lose connection.
	Get Automatically	Select the Radio button for the DNS servers to be obtained
	From ISP	automatically from the DHCP server.

	Use These DNS Servers	Select the Radio button for setup the Primary DNS and
		Secondary DNS servers manually.

	Discard Ping on WAN	Place a check to Enable or Disable ping from WAN.

	Accept / Cancel	Press Accept to confirm the changes or Cancel to return
		previous settings.

Accept does not apply the changes – you must go to Status -> Save / Load to apply the new settings. Please refer to Chapter 4.1 for more information.

If the router's MTU is set too high, downstream packets will be fragmented. If

the router's MTU is set too low, the router will fragment packets unnecessarily and, in extreme cases, may be unable to establish connections. In either case, network performance can suffer.

Image 59

Contents Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary Before you start About This DocumentProduct Overview FeaturesDifficult-to-wire environments Ability to access real-time informationTraining and educational facilities Wireless extensions of Ethernet networksWired LAN backup Frequently altered environmentsBenefits Hardware Overview Package ContentsSystem Requirement LED Understanding the ENH500 LEDsInstalling the ENH500 InstallationPre-installation Guidelines This completes the installation procedure Wireless Network Modes Access Point ModeAccess Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Microsoft Windows Configuring Your Computer for TCP/IPPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Click the Network Connections icon Configuring Apple Mac OSLogging into the ENH500 Username and Password Save / Load StatusMain System Log Wireless Client ListDhcp Client Table Connection StatusSystem Switching the Operation Mode Wireless Settings Wireless ConfigurationExtension Channel Wireless ModeChannel HT Mode Accept / CancelStation Separation Wireless SecuritySave / Cancel Suppressed SsidWDS Client Site SurveyPrefer Bssid Refresh ProfileWireless mode supports 802.11a/n mixed modes. It is Mode MAC AddressFilled in if an AP in the Site Survey is selected Profile 1 WEP Wireless Security SettingsWPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Shaping Wireless TrafficAggregation Add Wireless MAC FilterACL Mode MAC Address FilterWDS Link Settings IP Settings LAN SetupSpanning Tree Settings Static IP Router SettingsWAN Settings Domain Name Internet ConnectionType Account NameUse These DNS Servers Dhcp Dynamic IPInternet Connection Type Get Automatically FromSecondary DNS servers manually That it remains in Auto PPPoE Point-to-Point Protocol over EthernetSpecify the Maximum Transmit Unit size. EnGenius recommends From ISP Connect on DemandKeep Alive Get AutomaticallyPptp Point-to-Point Tunneling Protocol Username Pptp ServerLAN Settings Router Mode VPN Pass Through Port Forwarding DMZ Address DMZDMZ Hosting Administration Management SettingsPort Save / Apply / CancelManagement Vlan Snmp Settings Firmware Upgrade Backup/Restore SettingsTime Settings Log Server IP Address Save/Apply / Cancel10.7 Log SyslogDiagnostics Access Point Network Configuration ExamplesProperties Select Operation Mode to Client Bridge from SystemWDS Bridge Address Automatically Select Operation Mode to Client Router from SystemChange your Local Area Network setting to Obtain an IP Internet Service Provider on the WAN SettingsQuestion Answer Appendix a TroubleshootingTo Factory Default in the Management Contacting Technical Support Rx Sensitivity Optimal dBm Appendix B SpecificationsChannel Tx Avg. Power Optimal dBm Environment & Mechanical Appendix C Glossary Access PointESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Federal Communication Commission Interference Statement Appendix D Statements of ConformityIndustry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish