Ricoh 220, 270 When copying onto non-detected standard size paper, Press the Pap.Type key when

	Copying from the Bypass Tray
A Press the {#} key.	Note
	❒ To change the number en-
	tered, press the {Clear/Stop}
	key and enter the new num-
	ber.
	❒ When you copy onto plain
	paper, go to step G.	2
	F Press the [Pap.Type] key when
	copying onto thick paper.

BPress the [Pap.Size] key.

CSelect [Custom Size] key by pressing the 1 key. Then press the [OK] key.

DEnter the horizontal size of the

paper with the Number keys, then press the {#} key.

Note

❒To change the number en- tered, press the {Clear/Stop} key and enter the new num- ber.

EEnter the vertical size of the pa- per with the Number keys, then press the [OK] key.

GSelect [Non Standard] by press- ing the 1 key. Then press the

[OK] key.

HPress the [Exit] key.

When copying onto non-detected standard size paper

Important

❒You should specify the size of paper to avoid paper misfeeds.

A Press the {#} key.

BPress the [Pap.Size] key.

43