Ricoh 270, 220 Rotate Sort Shift Sort, Shift Sort optional finisher or shift sort tray required

Copying

❖Rotate Sort

	2	3		2	3	1				2	3
1			1				2		1
								3

2

❖Shift Sort

1 2 3 1

1

Three sorting methods are available:

❖Sort

Copies can be assembled as sets in sequential order.

❖Rotate Sort

Every other copy set is rotated by 90°KL and delivered to the copy tray.

❖Shift Sort (optional finisher or shift sort tray required)

Every other copy set is shifted for ease of separation. The shift tray of the finisher or shift sort tray pro- vides this function by sliding from side to side.

Note

❒To switch among Sort, Rotate Sort,

and Shift Sort modes, access the user tools. See “6. Sort” on ⇒ P.125 “3. Input/Output 2/2”.

❒The paper sizes that can be used with the Rotate Sort function are as follows:

Metric version	A4KLB5JISKL
Inch version	81/2" × 11"KL

❒To use the Rotate Sort function,

two paper trays identical in size and different in direction (K L) are required.

❒The paper sizes that can be used in Shift Sort function are as follows:

1000-sheet finisher

A3L, B4JISL, A4KL, B5JISKL, 81/

2" × 13"L, 11" × 17"L, 81/2" × 14"L, 81/ 2" × 11"KL

Reference

For the paper capacity of the op- tional finisher, see ⇒ P.38 “Staple”.

APress the [Sort/Staple] key.

BMake sure that [Sort ] is se- lected, then press the [OK] key.

CEnter the number of copy sets with the Number keys.

Limitation

❒The maximum number of sets is 99.

DSet your originals.

When setting a stack of originals in the document feeder

A Set a stack of originals in the document feeder, then press the {Start} key.

36