Ricoh 220, 270 operating instructions If you selected numbering format 1/5, 2/5, … in step C

Page Numbering—Printing Page Numbers

CSelect the desired mode by press- ing the 01 keys. Then press the

[OK] key.

•To change the position of page numbers, press the [Po- sition] key.

If you selected numbering format P1, P2, … or -1-, -2-, … in step C

AIf you wish, do one of the fol- lowing:

•To change the page on which numbering starts, press the

[Prt.Page] key.

•To change the position of page number, press the [Posi- tion] key.

If you selected numbering format 1/5, 2/5, … in step C

AEnter the page on which num- bering will start (Start Page), the total number of pages (To- tal Pages).

BPress the [OK] key.

CIf you wish, do one of the fol- lowing:

•To change the page on which numbering starts, press the

[Prt.Page] key.

D Press the [OK] key. 2

Note

❒If you want to change the entered numbers, press the [Prt.Page] key.

To change the numbering position

APress the [Position] key.

BSelect the desired numbering position by pressing the 1 key.

Note

❒If you want to change the original orientation, press the [Original] key.

CPress the [OK] key.

EPress the [OK] key.

FPress the [Exit] key.

Note

❒When you set the original on the exposure glass, press the {#}key after all originals are scanned.

79