Staple, Set the original, then press the Start key | Ricoh 270, 220

Copying

2

38

When setting a stack of originals in the document feeder

ASet a stack of originals in the

document feeder, then press the {Start}key.

After all the originals are scanned, the copies are deliv- ered to the tray.

When setting an original on the exposure glass or in the document feeder

ASet the original, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next original, then press the {Start} key.

Note

❒Set the original in the same direction as the first one.

CAfter all originals are scanned, press the {#} key.

The copies are delivered to the tray.

Staple

The optional finisher is required to use this function.

Each copy set can be stapled together.

Limitation

❒You cannot use the following pa- per with this function:

•Post cards

•Translucent paper

•OHP transparencies

•Adhesive labels

•Curled paper

•Low stiffness paper

•Paper of different sizes

Note

❒See the tables below for allowable paper sizes and capacities avail- able with this feature. When the number of copies exceeds the tray capacity, copying stops. In this case, remove the copies from the shift tray and then resume copy- ing.

	1000-sheet finisher

Paper size	A3L, B4JISL, A4KL,
	B5JISKL, 8" × 10"KL,
	81/ "	× 11"KL, 8" × 13"L,
	2
	81/ "	× 13"L, 81/	" × 14"L,
	2	2
	81/ "	× 13"L, 10" × 14"L,
	4
	11" × 17"L, 8K L, 16K
	KL

Stapler ca-	• A4, 81/ " × 11" or small-
pacity	er	2
pacity	er
	: 30 sheets (80g/m2, 20
	lb)
	• B4JIS, 81/2" × 14" or
	larger
	: 20 sheets (80g/m2, 20
	lb)

Shift tray	1,000 sheets (80g/m2, 20
capacity	lb)
(A4K, 81/
2" × 11"K)

❒In the following cases, the copies will be delivered to the shift tray without stapling.

Image 50

Ricoh 270, 220 operating instructions Staple, Set the original, then press the Start key

Contents

220/270 Overseas Affiliates Page FCC Requirements This equipment uses the following Usoc jack RJ11C Safety Information Safety During OperationPage Iii How to Read this Manual Symbols Table of Contents Other Functions Numbering-Printing Page Numbers Combination ChartSort/Stack/Staple Combine-Combining Originals into One Copy Loading Paper Accessing the User Tools Copy Features 111If Your Machine does not Operate as You Want Adding Staples 107 Removing Jammed Staples 109 146 Dos and Donts 129 Where to Put Your Machine 130Maintaining Your Machine 132 Viii This page is intentionally blank What You Can do with this Machine Copy Mode Page Machine Types Guide to Components Operation switch Main Power indicatorOn indicator Bypass tray option Options Operation Panel Copier only Fax or printer installedIndicators Stamp key Panel displayKeys Cursor keys Number keys Zoom keyLighter key and Darker keys and Auto Image Density key Start key Copy display Panel DisplayDisplays and Key Operations Common keys −Prev. ↓Next Operation switch right side of the op- eration panel Turning on the PowerPower switches for fax or printer installed machine Main power switch front of the ma- chine Press the Energy Saver key Turning off the PowerPress the operation switch to make the On indicator go off Changing Modes Metric version Sizes and Weights of Recommended OriginalsOriginals Inch version Sizes Difficult to Detect Sizes detectable by the Auto Paper Select Metric version Document feeder Original Sizes and Scanning Area/Missing Image AreaExposure glass Copy Paper Recommended Paper Sizes and Types Changing the Paper Size Paper Size in Tray Non-recommended Paper Paper Storage Toner Toner Storage Photo Conductor Unit Storage Photo Conductor Unit PCUHandling Photo Conductor Unit Replacing Photo Conductor Unit Make sure that there are no previ- ous settings remaining Basic ProcedureMake sure that the machine is in Copy mode Set your originals System Reset Auto Off Setting Originals Document Feeder Setting OriginalsSetting Originals on the Exposure Glass Lift the platen cover or the docu- ment feeder Setting a stack of originals in the document feeder When Sadf mode is selected Originals in the Document Feeder Adjusting Copy Image Density Basic Functions Text·Photo Selecting Copy PaperText Photo Manual Paper Select Manual Paper SelectAuto Paper Select Select the copy paper Rotate Copy Machine ChooseReproduction Ratios Where Original is Original size and direc Set Tion Sort Sort/Stack/StapleSort-Sorting into Sets 123, 123 Stack Rotate Sort When setting a stack of originals in the document feederRotate Sort Shift Sort Shift Sort optional finisher or shift sort tray required Shift Stack optional finisher or shift sort tray required After all originals are scanned, press the # key Staple Set the original, then press the Start key Staple position and original direction When memory reaches 0% Copying from the Bypass Tray Open the bypass tray Push up the paper guide release lever Push down the paper guide re- lease lever When copying onto OHP transparenciesWhen copying onto non-standard size copy paper Press the Exit key When copying onto non-detected standard size paperPress the Pap.Type key when Set your originals, then press the Start key Storing a Program Program-Storing Your Copy Settings in MemoryStoring Your Settings Deleting a Program Deleting a Program Recalling a Program While a document is being fed Other FunctionsEnergy Saver Mode-Saving Energy Originals have been fed User CodesInterrupting copying after all Press the Interrupt key When you want to make one sided copies How to Set the Papers with LetterheadWhen you want to make two sided copies Original Tone Original → Copy Press the Reduce/Enlarge key to select a ratio Select the ratio by pressing the 01 keys Zoom-Reducing and Enlarging in 1% Steps When using the n or o keyWhen using the Number keys Original with the Number keys Then press the # or 1 key Size Mag. inch key, then Set your originals, then press Set your originals, then press the Start key Border Erase Center/Border Erase-Erasing the Center and the BorderCenter Erase Center Center Border Orig. optional duplex unit is required Combine-Combining Originals into One CopyOrig Front ⇒ P.122 2. Adjust Image 2/3 Orig. optional duplex unit is re- quired Portrait K originals Set your originals, then press the Startkey Book Sided The optional document feeder is required Sided -Making One- sided Copies from Two-sided Originals Sided Duplex-Making Two-Sided CopiesSided -Making Two- sided Copies from One-sided Originals Originals and copy direction Original direction and completed copies Press the Orientn. key When setting the copy directionSided -Making Two- sided Copies from Two-sided Originals Original Copy paper Front Cover Cover-Adding or Inserting SheetsFront Cover-Copying or Adding a Front Cover Both Covers Both Covers-Copying or Adding Front and Back Covers OHP Slip Sheet-Copying or Inserting Slip Sheets Positive/Negative-Copying Complementary Colors 11L Repeat Image-Repeating an Image over the Entire CopyOriginal 51/2 × 81/2K/Copy 11K Merging Images Overlay-Merging Two Different Originals Set your originals, then press the Start key Preset Stamp-Printing Preset Messages on Your Copies Original setting, stamp position Orientation When changing the stamp Position and orientation When changing the numbering format Press the Stamp key Press the Page No. key Original setting, stamp position and orientationNumbering-Printing Page Numbers Press the OK key Press the Exit key If you selected numbering format 1/5, 2/5, … in step CTo change the numbering position Combination Chart Following shows the combinations of functions Combination Chart Copying If Your Machine does not Operate as You Want Message Problem Cause Action Display Adjusting Copy Image Density If You Cannot Make Clear Copies Adjust Image If You Cannot Make Copies as You Want Combine Stamp Adjust Image 1/3 Duplex Loading Paper Loading non-standard size paper in the tray Push the tray in until it stops Place the paper in the tray Loading Paper in the Large Capacity TrayPull out the large capacity tray Changing the Toner Bottle Regarding toner storage, see ⇒ P.23 Toner Storage What to do If Something Goes Wrong Replacing Photo Conductor Unit PCU PCU What to do If Something Goes Wrong Replacing Photo Conductor Unit PCU What to do If Something Goes Wrong Close the right cover of the machine Clearing Misfeeds Clearing Misfeeds 100 101 102 Changing the Paper Size 103 Lock the side lever 104 Standard Paper Setting the non-standard size paperChanging the Paper Size in Tray Non-standard Paper 106 When the paper size you require is displayedWhen the paper size you require is not displayed Press the 0 or 1 key to select the paper size. Then press Adding Staples 107 108 Removing Jammed Staples 109 110 Enter 2 with the Number keys Accessing the User Tools Copy Features111 Exiting the User Tools 112 113 User Tools Menu Copier Features 114 115 116 Settings You Can Change with the User ToolsGeneral Features 1/4 General Features 2/4 117 General Features 3/4 118 General Features 4/4 119 120 Adjust Image 1/3 121 Adjust Image 2/3 122 123 Input/Output 1/2 124 Input/Output 125 126 Stamp Setting 127 128 Dos and Donts 129 Optimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoid 131 Power ConnectionAccess to Machine Cleaning the machine Cleaning the Platen CoverCleaning the Document Feeder Cleaning the Exposure Glass Maintaining Your Machine Mainframe First copy time Copy paper weightNon-reproduction area Copying speed Type Copy paper capacity Reproduction ratioContinuous copying count 135 136 Power consumptionWeight Document Feeder Option Paper capacity Paper Tray Unit OptionAvailable paper size 138 139 Internal Tray 2 1bin tray OptionNumber of bins Available paper size Finisher Option Approx .6kg, 3.5 lb Shift Sort Tray Option141 Large Capacity Tray LCT Option 142 143 Power consumption MaxDuplex Unit Option Bypass Tray Option 144 Additional functions 48MB Copier Memory Unit OptionMemory capacity Number of originals that can be stored about 100 pages Index 146 147 148